No products in the cart.
Home » Brakes » Cable Accessories
Every time you visit your garage with an issue concerning your engine, the mechanics will assess numerous systems including the cable system. The electrical and braking systems are both powered and maintained by a host of cables that need to be well placed. Leak prevention and vibration control rely on the proper functioning of your car cables. Malfunctioned cables will inevitably tamper with the soundproofing and slip resistance ability of your car. Cables need to be protected and bundled, and this can only be made possible using the right cable accessories. If you make the right choice regarding cables, then your car will serve you for years on end.
You can make fine length adjustments on any cable thanks to the threaded cable adjuster that comes with 2 locknuts. The adjustments are important especially when you are looking to make room for another component without compromising the cable system. They may also be required where the cables do not fit appropriately in their designated areas. Once in a while brake cylinders will require adjustments. If you need to change a cylinder quickly, then the quick release clevis will be worthwhile for you. It works well for pedal boxes as well as handbrakes and is one of the most common brake cable accessories. This clevis performs the same function as the lever adaptor clevis bracket that features prominently in motorsports. Clamps are also suitable for speedy adjustments.
It goes without saying that your car cables need to be interconnected if you hope to achieve their maximum function. You’ll need flexible cable ferrules along with a crimping tool to create loops that will keep the cables together. Cable clevises are also important in making such connections. The large cable clevis, designed for the 1.5 mm cables, is a suitable cable accessory for this task. It usually comes with a split pin as well as the bush. Master cylinder pushrod clevis is also part of the numerous brake cable accessories category. It has a female 5/16″ UNF thread that attaches the master cylinder pushrod to a pedal assembly or handbrake lever. This will ensure that your braking system remains on point and you’ll drive with very little worries. An automotive plumbing solutions pin will help to hold the master cylinder pushrod clevis in position. Ball and socket joints are also used when making cable connections. The quick release joints with both the left and right female hand threads will serve best for this function. They ensure that mechanics don’t have a hard time when making improvements to your system.
The cables can be held firmly in position using EdgeClips. They provide grip on edges ensuring that cable conduits do not lie loosely within the car. This will go a long way in ensuring that the electrical system of the car is not tampered with. They especially come in handy where adhesives cannot be used. Most of them are found around high-temperature areas. Cable ties are also important for maintaining the position of cables. They ensure that cables serving different systems within the car are separated appropriately. There are numerous varieties of cable ties depending on the intended use. You can choose from the serrated ties, ties with fixing elements and releasable cable ties among others. The bottom line is that they will ensure that your car cables are not mixed up. This will, in turn, make troubleshooting less complex. The small solderless nipple has also been used to fasten cables and ensure that they are not misplaced. Most of them work well for cables with a 1.5 mm inner diameter. They will secure the cables and safeguard them from the constant bumping of the vehicle. Given that they are distributed all over the car, cables also have to go round bends. The 90 degree cable guide, as its name suggests, is used where a 900 degree turn needs to be made.
The automotive industry continues to evolve, and much of this development has been seen in the upgrading of cable accessories. The consistent replacement of metal accessories with plastic accessories is one such development. This move was informed by the industry’s desire to create durable cable management products. Most of these are cost-optimised to ensure that you get more for less.
There is no doubt that the proper functioning of a car relies heavily on the cable system. Get the proper cable accessories to ensure that this system remains intact. Do not ignore the recommended service intervals as they will help you keep tabs on the state of your cable system. We cannot overemphasise the value of a stable system. Use the best accessories to ensure that your car is not compromised.
Anti-roll bars, also known as sway bars, play a crucial role in a vehicle's handling by reducing body roll during cornering. They connect the left and right sides of the suspension, helping to distribute weight more evenly across the vehicle. Effects on Handling:
An anti-roll bar, also known as a sway bar, is not strictly necessary for a vehicle to function, but it plays a significant role in enhancing handling and stability. Benefits of an anti-roll bar include:
Yes, you can bleed brakes on your own with the right tools and technique. Here’s how to do it: Tools Needed:
The cost to fix bleeding brakes can vary based on several factors, including the make and model of the vehicle and the labour rates in your area. Generally, you can expect the following costs:
Bleeding your brakes is essential for maintaining optimal braking performance. It is generally recommended to bleed your brakes:
Brake bleeders are essential components in a vehicle's braking system. Their primary function is to remove air bubbles from the brake lines, ensuring that the brake fluid can flow freely and effectively. This process is crucial for maintaining optimal braking performance. Key functions of brake bleeders include:
A bigger brake master cylinder increases the volume of brake fluid that can be pushed through the braking system. This can lead to several benefits:
The brake master cylinder is a crucial component of a vehicle's braking system. Its primary functions include:
The best materials for brake lines are:
It is generally recommended to change brake fluid every 2 years or 24,000 miles, whichever comes first. However, this can vary based on the vehicle manufacturer’s guidelines and driving conditions.