"AIM Motorsport MXT 1.3 Dash Logger (10" Colour TFT Display)" - Car/Bike with 4m Cable

Name: "AIM Motorsport MXT 1.3 Dash Logger (10" Colour TFT Display)" - Car/Bike with 4m Cable
Brand: AIM Motorsport
Price: 3000 GBP
Availability: InStock

The AIM MXT 1.3 Dash Logger features an expansive 10" TFT display, ideal for various motorsport categories with customisable configurations. Designed to acquire and exhibit data from your ECU, GPS module (included), analogue/digital inputs, and predefined math channels, this logger also supports up to eight expansion modules for enhanced performance. Supplied with a GPS09 module, wiring harness with military-spec motorsport connectors, data lead, and RaceStudio3 software (download for updates). The MXT 1.3 Dash Logger boasts a wide display, which sets it apart from the MXS, MXP, or MXG models that feature 5", 6", or 7" displays respectively. Installing this logger in a car or bike is simplified through a single ECU connection for rapid setup with minimal additional wiring requirements. Acquired data typically includes RPM, engine load, throttle position (TPS), temperature readings (oil/air/water), oil pressure, battery voltage, speed, gear status, and lambda value (air/fuel ratio). The included GPS09 module offers four cable length options: 0.5m, 1.3m, 2m, or 4m, with a 'roof version' available for easy installation on covered vehicles or motorbikes. This dash logger features two digital outputs, each providing 1 amp at 12 volts, which can be configured to control external systems such as lights, fans, or pumps based on analogue/digital input values. The MXT 1.3 Dash Logger's high-contrast display is fully customisable using dedicated software, enabling you to create multiple pages and configure fonts for all displayed information. Swapping between pages can be accomplished with one or two push buttons, and an ambient light sensor maintains optimal backlight brightness levels. Eight RGB alarm LEDs are configurable, allowing you to select conditions, colours, solid/flashing alarms with text messages, and setting priorities. A customisable shift light feature offers advanced multi-coloured RGB patterns tailored to unique gears, depending on your preferences. Lap time calculation and track position analysis are facilitated by the GPS09 Module. This module stores over 200 world tracks' start/finish line coordinates, identifying them automatically upon start-up for immediate sampling of lap and split times. If a track is not included in the database, you can add start/finish line coordinates via PC using RaceStudio3 Track Manager software. The MXT 1.3 Dash Logger connects to your ECU via CAN for easy setup and sampling of numerous channels directly from the vehicle's ECU instead of connecting multiple analogue sensors. The available ECU drivers constitute approximately 1000+ different vehicles, both stock and racing. Two digital outputs facilitate control over external systems through configuration: switch on/off lights, activate fans or pumps based on input values. Wireless configuration, calibration, and data download are enabled via secure 802.11 WiFi connectivity after initial setup using a USB cable. The MXT 1.3 Dash Logger's lightweight aluminium military-spec motorsport connectors ensure durability and reliability. Expand the system further by integrating expansion modules, such as SmartyCam3 cameras, Channel Expansion, TC Hub, LCU-One Lambda Controller, and Memory Module via the built-in CAN bus.

Current Lowest Price

GBP 3000

VISIT SITE

PRODUCT DATA

SellerDemon Tweeks
BrandAIM Motorsport
CategoryDash Displays
ConditionNew
Stock StatusOut of Stock
Part NumberMXT-4
Delivery Time1 to 4 days
Delivery Cost6.95

"AIM Motorsport MXT 1.3 Dash Logger (10" Colour TFT Display)" - Car/Bike with 4m Cable

PRODUCT DATA

PRICE HISTORY

RELATED PRODUCTS

About CP

Buying

Selling

Small Print

FOLLOW

Seller	Demon Tweeks
Brand	AIM Motorsport
Category	Dash Displays
Condition	New
Stock Status	Out of Stock
Part Number	MXT-4
Delivery Time	1 to 4 days
Delivery Cost	6.95