Evans Prep Fluid - Waterless Engine Flush - 5 Litre

Before switching to Evans Waterless Coolant, it's essential to remove existing water-based coolant from your system. To get the most out of Evans, we recommend that no more than 3% residual water should be present in your coolant.

We've formulated a hygroscopic Prep Fluid designed to flush the system before adding Evans. This fluid is specifically designed to absorb any residual water and remove loose deposits from the cooling system.

• Fill the freshly drained cooling system with Evans Prep Fluid and run the engine up to normal operating temperature.
• The hygroscopic fluid will absorb any residual water and flush out any loose deposits.

Once the Prep Fluid has been drained from the system, store it in an airtight container as it can be used several times. Available in 2litre or 5 litre (please call if you require 25 Litres).

About Evans Waterless Coolant:

The limitations of traditional water-based coolants have been well-documented since the 1930s, with a mixture of water, ethylene glycol (antifreeze), and corrosion inhibitors. These mixtures have inherent physical and chemical limitations that affect engine performance and lead to engine failures.

According to the British Testing Council's Testing Advisory Group, "up to 60% of engine failures can be attributed to cooling system failures", highlighting the need for a better solution!

Evans Waterless Coolant represents a major step forward in engine cooling technology. Over the last 20 years, it has been proven to increase engine reliability, reduce maintenance costs, and improve performance.

The advantages of Evans Waterless Coolant are numerous:

• NO WATER - NO OVERHEATING: Evans Waterless Coolants have boiling points above 180°C, effectively eliminating overheating, boil-over, and after-boil.
• NO WATER - NO PRESSURE: Evans Waterless Coolants have a very low vapour pressure, eradicating the danger of scalding and reducing the strain on engine components.
• NO WATER - NO CORROSION: Evans Waterless Coolants eliminate corrosion sources.
• NO WATER - MORE BHP: Evans Waterless Coolants eliminate engine hotspots, leading to poor combustion and loss of power.
• NO WATER - NO LINER EROSION: Evans Waterless Coolants are proven to reduce liner pitting by 75% compared with water-based coolants.
• NO WATER - NO SCALING: Evans Waterless Coolants contain none of the impurities that lead to scaling and poor heat transfer.
• NON TOXIC: Evans Waterless Coolants are proven to be Non-Toxic. Standard anti-freeze is toxic and known to kill pets.

Upgrade your engine's performance and reliability with Evans Waterless Coolant today!