Towing Eyes & Straps

Showing Products 1 - 9 out of total 12

View
Filters: Towing Eyes & Straps
LTEC Tow Strap

LTEC Tow Strap

Tow Hook 2 Inch Width 20CM Length According To FIAView more

$15.34

1 retailer

A I Tech Tow Eye – 50mm FIA Approved, Red

A I Tech Tow Eye – 50mm FIA Approved, Red

Lightweight towing eyes machined from 8mm thick billet aluminium and finished in anodised red.Available in two sizes – 80mm for FIA use (125mm max length x 110mm max width) and 50mm for non FIA or trackday use (69mm max length x 70mm max width).View more

$48.03

1 retailer

A I Tech Tow Eye – 80mm FIA Approved, Red

A I Tech Tow Eye – 80mm FIA Approved, Red

Lightweight towing eyes machined from 8mm thick billet aluminium and finished in anodised red.Available in two sizes – 80mm for FIA use (125mm max length x 110mm max width) and 50mm for non FIA or trackday use (69mm max length x 70mm max width).View more

$48.03

1 retailer

OMP Angled Tow Eye, Yellow

OMP Angled Tow Eye, Yellow

Designed to be bolted to the front or rear of the car this angled tow hook from OMP is constructed from 6mm thick aluminium making it both strong and lightweight.View more

$54.67

1 retailer

OMP Flat Tow Eye, Yellow

OMP Flat Tow Eye, Yellow

Designed to be bolted to the front or rear of the car this flat tow hook from OMP is constructed from 6mm thick aluminium making it both strong and lightweight.Dimensions – 216mm overall length, 50mm ID hole, 140 x 40mm mounting flangeView more

$54.67

1 retailer

Pitking Products Tow Strap Carabiner, Silver

Pitking Products Tow Strap Carabiner, Silver

These heavy duty Carabiners are ideal for mounting tow straps to road cars for trackdays and removes the necessity to bolt to the chassis.Image showing strap is for example purposes only. The tow strap is not included.View more

$4.59

1 retailer

Pitking Products Wire Towing Eye – Green, Green

Pitking Products Wire Towing Eye – Green, Green

These heavy duty wire towing eyes are the perfect solution for the recovery of a motorsport vehicle. Designed to be mounted securely to the vehicle chassis, front or rear sub frame or something of similar strength of your race / rally car with the large (60mm diameter) loop protruding through the bumper or grill. They should not be bolted to a normal body section like the inner front panel or the boot floor, unless a reinforcing plate is used similar to a harness belt mounting. The wire towing eye needs to be secured with a M12 or 1/2″ nut and bolt and two flat washers. The eye may be mounted either horizontally or vertically, whichever suits the vehicle best. There is a material tag attached to the loop to retrieve it in case it drops inside the bumper or grill.Construction – 6mm stainless steel wire with copper ferrule crimp. Bright coloured plastic covered loop with choice of colours.Max load – 2.6 tonsLength – 300mmComplies with FIA and MSA regulations. It is recommended to fit 4 per car (as in BTCC).Please note: the wire towing eye is for towing only and must not be used for lifting.View more

$22.24

1 retailer

Pitking Products Wire Towing Eye – Red, Red

Pitking Products Wire Towing Eye – Red, Red

These heavy duty wire towing eyes are the perfect solution for the recovery of a motorsport vehicle. Designed to be mounted securely to the vehicle chassis, front or rear sub frame or something of similar strength of your race / rally car with the large (60mm diameter) loop protruding through the bumper or grill. They should not be bolted to a normal body section like the inner front panel or the boot floor, unless a reinforcing plate is used similar to a harness belt mounting. The wire towing eye needs to be secured with a M12 or 1/2″ nut and bolt and two flat washers. The eye may be mounted either horizontally or vertically, whichever suits the vehicle best. There is a material tag attached to the loop to retrieve it in case it drops inside the bumper or grill.Construction – 6mm stainless steel wire with copper ferrule crimp. Bright coloured plastic covered loop with choice of colours.Max load – 2.6 tonsLength – 300mmComplies with FIA and MSA regulations. It is recommended to fit 4 per car (as in BTCC).Please note: the wire towing eye is for towing only and must not be used for lifting.View more

$22.24

1 retailer

Pitking Products Wire Towing Eye – Yellow, Yellow

Pitking Products Wire Towing Eye – Yellow, Yellow

These heavy duty wire towing eyes are the perfect solution for the recovery of a motorsport vehicle. Designed to be mounted securely to the vehicle chassis, front or rear sub frame or something of similar strength of your race / rally car with the large (60mm diameter) loop protruding through the bumper or grill. They should not be bolted to a normal body section like the inner front panel or the boot floor, unless a reinforcing plate is used similar to a harness belt mounting. The wire towing eye needs to be secured with a M12 or 1/2″ nut and bolt and two flat washers. The eye may be mounted either horizontally or vertically, whichever suits the vehicle best. There is a material tag attached to the loop to retrieve it in case it drops inside the bumper or grill.Construction – 6mm stainless steel wire with copper ferrule crimp. Bright coloured plastic covered loop with choice of colours.Max load – 2.6 tonsLength – 300mmComplies with FIA and MSA regulations. It is recommended to fit 4 per car (as in BTCC).Please note: the wire towing eye is for towing only and must not be used for lifting.View more

$22.24

1 retailer