Current Filters
The Cobra Office Seat Base allows you to mount any Cobra base mounted seat, turning it into your ultimate office chair. Built in height adjustment and 5 castor
£107.12
Cobra have designed a set of aftermarket runners developed to fix to Cobra vehicle specific mounts or competition mounts where runners are permitted within the regulations. The Runners are manufactured to the highest quality for durability and finished in gloss black for a subtle look suitable in any cockpit. The Cobra runners are designed specifically for
£59.00
These sliding seat mounts from Recaro are designed for side mounting competition seats and enable them to be adjusted. This makes them ideal for endurance races where driver changes need to be done as quickly as possible. Adjustment is made by lifting a bar at the front of the mount and can easily be done whilst wearing race gloves. Two versions are
£973.00
These sliding seat mounts from Recaro are designed for side mounting competition seats and enable them to be adjusted. This makes them ideal for endurance races where driver changes need to be done as quickly as possible. Adjustment is made by lifting a bar at the front of the mount and can easily be done whilst wearing race gloves. Two versions are
£619.00
These sliding seat mounts from Recaro are designed for side mounting competition seats and enable them to be adjusted. This makes them ideal for endurance races where driver changes need to be done as quickly as possible. Adjustment is made by lifting a bar at the front of the mount and can easily be done whilst wearing race gloves. Two versions are
£784.00
OMP Vehicle Specific Tailored Seat Subframes have been designed to bolt straight into specific vehicles with no further modification or fabrication required. OMP slides and/or tilt mechanisms can be used with these baseframes to complete seat installation. Check specific fitment notes for accessories that may be necessary to complete fitment. Note: We
£89.74
OMP Vehicle Specific Tailored Seat Subframes have been designed to bolt straight into specific vehicles with no further modification or fabrication required. OMP slides and/or tilt mechanisms can be used with these baseframes to complete seat installation. Check specific fitment notes for accessories that may be necessary to complete fitment. Note: We
£90.00
OMP Vehicle Specific Tailored Seat Subframes have been designed to bolt straight into specific vehicles with no further modification or fabrication required. OMP slides and/or tilt mechanisms can be used with these baseframes to complete seat installation. Check specific fitment notes for accessories that may be necessary to complete fitment. Note: We
£112.63
The OMP steel seat side mounts are made from 3mm powder coated steel and offer a huge range of adjustment to allow you to position your seats exactly where you want them, thanks to the multi hole design. Available in a selection of profiles, offering even more choice, the slotted hole design allows increased angles of the seat to be achieved. FIA Approved.
£46.00
The OMP steel seat side mounts are made from 3mm powder coated steel and offer a huge range of adjustment to allow you to position your seats exactly where you want them, thanks to the multi hole design. Available in a selection of profiles, offering even more choice, the slotted hole design allows increased angles of the seat to be achieved. FIA Approved.
£89.74
The OMP steel seat side mounts are made from 3mm powder coated steel and offer a huge range of adjustment to allow you to position your seats exactly where you want them, thanks to the multi hole design. Available in a selection of profiles, offering even more choice, the slotted hole design allows increased angles of the seat to be achieved. FIA Approved.
£59.00
These OMP alloy side mounts are made from 6mm aluminium and thanks to the multi hole design, offer a huge range of adjustment to allow you to set up and position your seats exactly where you want them. Available in a selection of profiles, offering even more choice, the slotted hole design allows increased angles of the seat to be achieved. Suitable for all
£133.68
These OMP alloy side mounts are made from 6mm aluminium and thanks to the multi hole design, offer a huge range of adjustment to allow you to set up and position your seats exactly where you want them. Available in a selection of profiles, offering even more choice, the slotted hole design allows increased angles of the seat to be achieved. Suitable for all
£128.35
Bride seat rails are made using precise measurements taken from each car by hand, this allows each rail to be an exact fit down to the size of each and every bolt hole. All Bride seat rails are ASEA approved. Bride FO Seat Rails are designed to fit with Fixed bucket seat series,edirb 031 / 042 / 061 (excluding the ZETAIII Type-XL,ZODIA) Bride rails are also
£204.00
Bride seat rails are made using precise measurements taken from each car by hand, this allows each rail to be an exact fit down to the size of each and every bolt hole. All Bride seat rails are ASEA approved. Bride FO Seat Rails are designed to fit with Fixed bucket seat series,edirb 031 / 042 / 061 (excluding the ZETAIII Type-XL,ZODIA) Bride rails are also
£204.00
Bride seat rails are made using precise measurements taken from each car by hand, this allows each rail to be an exact fit down to the size of each and every bolt hole. All Bride seat rails are ASEA approved. Bride RO Seat Rails are designed to fit reclining bucket seats GIAS series,STRADIA series,edirb 023 / 033 ,CUGA series,VORGA
£204.00
Bride seat rails are made using precise measurements taken from each car by hand, this allows each rail to be an exact fit down to the size of each and every bolt hole. All Bride seat rails are ASEA approved. Bride RO Seat Rails are designed to fit reclining bucket seats GIAS series,STRADIA series,edirb 023 / 033 ,CUGA series,VORGA
£204.00
Bride seat rails are made using precise measurements taken from each car by hand, this allows each rail to be an exact fit down to the size of each and every bolt hole. All Bride seat rails are ASEA approved. Bride RO Seat Rails are designed to fit reclining bucket seats GIAS series,STRADIA series,edirb 023 / 033 ,CUGA series,VORGA
£180.00
Bride seat rails are made using precise measurements taken from each car by hand, this allows each rail to be an exact fit down to the size of each and every bolt hole. All Bride seat rails are ASEA approved. Bride RO Seat Rails are designed to fit reclining bucket seats GIAS series,STRADIA series,edirb 023 / 033 ,CUGA series,VORGA
£180.00
Bride seat rails are made using precise measurements taken from each car by hand, this allows each rail to be an exact fit down to the size of each and every bolt hole. All Bride seat rails are ASEA approved. Bride RO Seat Rails are designed to fit reclining bucket seats GIAS series,STRADIA series,edirb 023 / 033 ,CUGA series,VORGA
£168.00