Oils & Lubricants

Showing Products 1 - 24 out of total 110

View
Filters: Oils & Lubricants

Amsoil 10w40 Premium Protection Engine Oil

Amsoil Premium Protection Synthetic Motor Oil is formulated to provide superior protection and performance in a wide variety of demanding applications. Its unique combination of synthetic base oils and a superior additive package results in a formulation that exceeds the requirements of most petrol or diesel applications that call for 10W-40 or 20W-50 motor oil. Premium Protection Synthetic Motor Oil is ideal for high-mileage vehicles and high-stress vehicles subject to hot temperatures. Meets the following specifications – API SL, SJ, SH, SG API CI-4+, CI-4, CH-4, CF, CF-2 ISO-L-EMA Caterpillar* ECF-1 JASO MA (Motorcycle) MAN* 271/3275 MTU Type 2 Cummins* 20071/20072/20076/20077 Volvo*, VDS-2, VDS Mack* EO-M+, EO-M ACEA A3/B3, E3, E5 MB 228.1, 228.3, 229.1 Detroit Diesel* 93K214 SAE 10w40 1 quart (0.94 Litre) BottlesView more

Millers Oils CFS NT Plus Nanodrive Engine Oil

The latest flagship CFS range from Millers Oils features an improved Nanodrive NT+ low friction package which reduces engine friction by 15% over and above the previous CFS NT range. This reduction in friction sets the CFS NT+ range of engine oils apart from all others and makes them the ideal choice for Motorsport where every horsepower counts. All the oils in the range are fully synthetic and are blended to produce increased levels of power and torque as well as noticeable gains in engine efficiency and performance. 'What is Nanodrive Technology?' NanoDrive technology uses spherical nanoparticle structures within the oil. Configured in a similar sort of composition to an onion, with 'skins', the Nano particles retain their protective properties under load, even under extreme pressure and will only 'shed' a layer without overall particle failure and loss of viscosity. The nanoparticles 'fill' any rough metallic surfaces to create a super smooth surface which ensures minimum wear on engine components and maximum power. Benefits: Significantly reduced friction Drop in component wear Lower heat generation Increased power Optimised reliability Longer service life and maintenance intervals The CFS NanoDrive range is available in different viscosities to suit most applications: 0W20- For modern...View more

Motul 300V Competition 15W50 Synthetic Engine Oil

Motul 300V Competition is a fully synthetic 15W50 oil for use in engines which have a wide range of RPM and temperatures. Ideal for use in Endurance racing, GT cars and Rallying where engines are subjected to high stresses for long periods of time. It is also suitable for historic cars with new or rebuilt engines. 300V Competition 15W50 is able to compensate high engine oil dilution by unburned fuel and maintains a stable oil pressure.View more

Driven Racing Oil BR Engine Break In Oil

Joe Gibbs Driven BR mineral oil designed specifically to promote piston ring sealing and provide increased protection for camshafts and followers during engine break in (running in). BR oil does not require any other additives and is suitable for full power dyno runs (up to hours running) before changing to race oil. Breaking in an engine correctly is vital to the ongoing performance and Joe Gibbs break in oil helps provide maximum compression for maximum horsepower. Compatible with methanol and other high octane race fuels. 1 quart (0.94 Litre) bottle.View more

Motul 8100 X-Cess 5W40 Synthetic Engine Oil

Motul 8100 X-CESS is a high performance 100% synthetic lubricant specifically designed for modern powerful cars with large capacity engines. Suitable for use in petrol and direct injection turbo diesel engines and safe with catalytic converters. Motul 8100 X-CESS engine oil has the following approvals – ACEA A3/B4 API SN/CF, BMW LL-01, GM-Opel LL B-025, MB Approval 229.5, Porsche A40, Renault RN0700 / RN0710, VW 502 00-505-00View more

Motul 8100 X-Power 10W60 Synthetic Engine Oil

Motul 8100 X-Power is a 100% synthetic high performance engine oil with an SAE viscosity of 10w60. Designed for use in cars with high performance naturally aspirated or turbo/supercharged petrol or diesel engines, 8100 X-Power has an increased resistance against deposits and offers high levels of anti wear protection. These properties ensure longer lasting protection for your engine along with stable oil pressure. 8100 X-Power has an increased oil film thickness which reduces burn off in the combustion chamber and helps prevent oil leaks in higher mileage engines. Recommended for – Aston Martin Alfa Romeo GT Lotus BMW M Series Maserati Ferrari V12 TVR Lancia Jaguar Audi R8 Meets ACEA A3/B4 and API SN/CF standardsView more

Millers Oils Classic Pistoneeze Mini Oil – 20W50

This mineral based multigrade oil is designed specifically for cars where the engine and gearbox share the same oil such as the classic Mini. It incorporates EP levels of gear protection providing improved engine and gearbox protection compared to a regular 20W50 oil. Gear changes are improved and idler gears last longer with Millers Classic Pistoneeze Mini Oil. API: SF, CD, GL-4 CCMC: G2View more

Mobil 1 New Life 0W-40 Engine Oil

The Mobil 1 New Life 0W-40 Engine Oil is the latest generation in the Mobil 1 product family. New Life 0W-40 contains special long-term protection additives which ensure engine cleanliness, prevents the build up of deposits on critical engine components and helps the engine retain its value. Furthermore, the oil optimises engines smooth running properties, which ensures both fuel consumption is reduced and CO2 emissions are minimised. For passenger car engines with extended oil change intervals Suitable for petrol and diesel car engines Better potential for fuel savings Optimum long-term protection for all engines Extraordinary wear protection properties Rapid lubrication even in extreme temperatures Reduction in CO2 emissions Available in 5 litre or 1 litre container sizes for changes or topping up.View more

Castrol EDGE Supercar Maximum Performance Engine Oil

Castrol EDGE SUPERCAR, boosted with Titanium FSTTM(Fluid Strength Technology) is Castrols strongest, most advanced fully synthetic engine oil which gives you the confidence to demand maximum engine performance from your competition, sports car or latest technology high powered engine. Maximises short and long term engine performance Reduces engine deposits to help maximise engine response Delivers unsurpassed levels of protection across a variety of driving conditions and temperatures Delivers and sustains maximum horsepower for longer, even when under pressure Advances in engine technology have led to increased power and efficiency, meaning engines work harder and under higher pressures than ever before. The only thing keeping metal engine components apart is the oil, so it needs to be strong and remain strong. Edge Supercar 10W-60 Suitable for use in automobile, gasoline and diesel engines where the manufacturer recommends an ACEA A3/B3, A3/B4, API SN/CF or earlier specification 10W-60 lubricant BMW approval for BMW M-Models that require a 10W-60 lubricant Koenigsegg Approved Approved for use in vehicles that require a VW 501 01 / 505 00 specification 10W-60 lubricant Edge Supercar 5W-50 Approved for use in vehicles where the manufacturer requires a product that Meets Ford WSS-M2C931-C. It has been exclusively developed for the FORD GT supercar and is also suitable for use...View more

Amsoil Engine Break In Oil – 30W

Amsoil Break In oil is formulated without friction modifiers to promote piston ring to bore bedding on new or rebuilt engines. Using a break in (running in) oil in a fresh high performance engine is highly important to maximise performance. This break in oil contains zinc and phosphorus anti wear additives to protect cam lobes, lifters and rockers during the critical first start up period. It has a high film strength to protect main, big end and cam bearings. Use Amsoil Break In Oil for initial running in of high performance or racing engines to ensure optimum compression resulting in maximum power output. Once the running in period is done (no more than 1000 miles), drain the oil and refill with the correct grade oil as recommended by your engine builder. SAE 30W 1 Quart (0.94 Litre) bottleView more

Castrol Edge Titanium FST High Performance Oil

Edge Titanium FST with 'Fluid Strength Technology' is a range of premium fully synthetic engine oils from Castrol offering the best protection for your road or race engine. Made for demanding drivers, Edge Titanium is designed to perform under extreme conditions whilst giving the advantage of increased acceleration, better fuel economy and extended service intervals. The Edge Titanium range comprises of many different viscosities to suit most applications – 0W-30 -Suited to modern petrol and diesel cars requiring ACEA C3; API SN specifications including many VW, BMW and Mercedes-Benz. 0W-40 A3/B4 -For petrol or diesel engines where the manufacturer recommends an ACEA A3/B3, A3/B4, API SN/CF specification oil. 5W-30 -Suited to petrol or diesel cars with variable servicing intervals (eg VW / Audi). 5W-40- Maximum protection for higher revving, higher output engines including modern high performance Turbo Diesel engines. Recommended by many modern engine tuners. 10W-60 -Suited to High Power engines which run at high temperatures and modified older engines. Now rebranded as "Castrol EDGE Supercar 10W-60 High Performance Oil". Pleaseclick hereor seeAlternatives. All are available in 1 Litre and 4 Litre sizes. When choosing oil, please always refer to your owner's handbook and the product specifications required.View more

Red Line High Performance Engine Oil

The Red Line range of high performance oils offer the highest quality available on the market today. Featuring a fully synthetic ester formula to give excellent wear protection and friction reduction across a wide range of operating conditions resulting in improved fuel economy and improved piston ring seal for increased power. High detergency allows extended oil change intervals and provides increased engine cleanliness. Red Line high performance oils are available in a range of viscosities to suit almost every vehicle and are supplied in 2 sizes – U.S Quart – Which equates to 0.94 Litres U.S Gallon – Which equates to 3.78 LitresView more

Millers Oils Classic Running In Oil – Mineral Based

This SAE 30 monograde oil is made from mineral base stock and is designed for the running in of classic engines. It can be used for running in on the road or for test bed running. Provides full protection to engine components whilst allowing the piston rings to bed properly with the cylinder bore. Use for running in only. Drain and replace with a conventional oil such as Millers Classic 20W50 once bedding in is complete. 5 litre bottle.View more

Millers Oils Classic Sport High Performance 20W50

Designed specifically for high performance classic car engines this 20W50 fully synthetic low friction oil from Miller Oils provides very high levels of wear protection thanks to its NanoDrive technology. The lower friction from this oil results in improved power and torque figures and also fuel economy. Classic Sport high performance 20W50 oil provides up to 63% reduction in friction and 38% reduction in wear compared to other synthetic 20W50 oils. What is NanoDrive technology.? NanoDrive technology uses spherical nanoparticle structures within the oil. Configured in a similar sort of composition to an onion, with 'skins', the Nano particles retain their protective properties under load, even under extreme pressure and will only 'shed' a layer without overall particle failure and loss of viscosity. The nanoparticles 'fill' any rough metallic surfaces to create a super smooth surface which ensures minimum wear on engine components and maximum power. Contains high levels of ZDDP (Zinc) for ultimate protection. 5 Litre or 1 Litre BottlesView more

Driven Racing Oil HR-1 15W50 Engine Oil

HR-1 is a 15W50 engine oil by Joe Gibbs which is suitable for older style pushrod (OHV) engines and has been developed to provide increased protection for camshafts. HR-1 also includes additives which protect against rust and corrosion even when the engine isnt running. This makes it ideal for classic cars which aren't used as daily drivers. Ideal for cast iron V8 engines or older engines with looser tolerances. 5 Litre or 1US Qt (0.946 UK Litre) bottleView more

Driven Racing Oil HR-3 15W50 Synthetic Engine Oil

Joe Gibbs HR-3 is a synthetic 15W50 oil which is suitable for older style pushrod (OHV) engines and has been developed to provide increased protection for camshafts. The synthetic formula provides a higher level of protection on startup compared to mineral oils. HR-3 also includes additives which protect against rust and corrosion even when the engine isn't running. This makes it ideal for classic cars which aren't used as daily drivers. Ideal for cast iron V8 engines or older engines with looser tolerances. Available in 5 Litre or 1 quart (0.94 Litre) bottlesView more

Amsoil 5w30 Signature Series Engine Oil

The Amsoil Signature Series has been developed to outperform other conventional and synthetic motor oils. It combines premier synthetic technology with Amsoils premium additive package resulting in a formula that exceeds the demands of modern engines. Amsoil signature series fully synthetic engine oil provides outstanding anti wear protection to increase engine life, improve efficiency and improve power. It remains stable at high temperatures and reduces sludge and varnish deposits. It also prevents build up of deposits on pistons maximising engine performance. Recommended for use in petrol engines cars and light trucks. Meets the following specifications API SN (Resource Conserving), SM…; ILSAC GF-5, GF-4…; ACEA A5/B5, A1/B1; GM LL-A-025, 6094M, 4718M; Ford WSS-M2C205-A; Chrysler MS-6395 SAE 5W30 1 quart (0.94 Litre) BottleView more

Millers Oils Millers Oils Trident 5W30 – High Performance Semi Synthetic Engine Oil

A semi synthetic high performance engine oil formulated to meet the demanding requirements of today’s engines. Recommended for use in modern vehicles where this type of oil is specified by the manufacturer including Ford and many Japanese models. Trident 5w30 is especially recommended for use in many modern petrol and diesel vehicles that require a fuel efficient lubricant. Provides easy starting and quick circulation of the oil even under very cold conditions Helps to maximise fuel economy and minimise emissions Protects against wear under arduous operating condition Allows the use of the modern longer oil change service intervals ACEA: A3 / B3-10, A3 / B4-08 API: SL, CF Mercedes-Benz: 229.1View more

Millers Oils Classic Sport 20W50 Engine Oil

Classic Sport is a semi synthetic engine oil developed for classic and sports car engines from the post war period through to the early 1980's. Classic Sport provides increased protection under arduous conditions and reduces oil consumption whilst maintaining high oil pressure. Ideally suited to Aston Martin, Jaguar, Ferrari, Lotus and other high performance classic engines. SAE 20W50 1 or 5 Litre BottlesView more

Millers Oils CRO 10W40 Running In Oil

CRO 10W40 is a motorsport oil designed to specifically to aid the running in process of rebuilt engines by providing full protection of highly stressed components whilst allowing optimum bedding in process for piston rings to the cylinder bore. It is not recommended that synthetic or semi synthetic oils are used for bedding in as they can be too slippery. This is a blend of high quality solvent refined mineral oils. Suitable for test bed running up to 5 hours or for 500 miles on the road CRO 10W40 also allows for short burst runs at full engine load. It is recommended that once the running in process is complete, the oil system is flushed and the oil replaced with the correct grade specified for the engine. Available in 1 or 5 Litre sizeView more

Amsoil 10w30 Signature Series Engine Oil

The Amsoil Signature Series has been developed to outperform other conventional and synthetic motor oils. It combines premier synthetic technology with Amsoils premium additive package resulting in a formula that exceeds the demands of modern engines. Amsoil signature series fully synthetic engine oil provides outstanding anti wear protection to increase engine life, improve efficiency and improve power. It remains stable at high temperatures and reduces sludge and varnish deposits. It also prevents build up of deposits on pistons maximising engine performance. Recommended for use in petrol engines cars and light trucks. Meets the following specifications API SN (Resource Conserving), SM…; ILSAC GF-5, GF-4…; ACEA A5/B5, A1/B1; GM LL-A-025, 6094M, 4718M; Ford WSS-M2C205-A; Chrysler MS-6395 SAE 10W30 1 quart (0.94 Litre) BottleView more

Fuchs Titan Race Pro S Engine Oil – FREE 1L Concentrated Screenwash

For a limited time only Fuchs Titan Race Pro S (5W40) 5 Litre is available at a special price, AND with a FREE 1 litre bottle of Fuchs Maintain concentrated screen wash. The Fuchs Titan Race Pro S is part of a range of fully synthetic, high performance engine oils which provide optimum protection for extended engine life and reliability. With exceptional performance attributes combined with enhanced anti wear properties plus outstanding extreme temperature protection and excellent cold start properties. Titan Pro Race S oil is suitable for use in turbocharged and normally aspirated diesel and petrol engines. Specifications / approvals: API, SJ, SL, CF, ACEA, A3, B3 Recommendations:BMW and Mercedes Image for illustration purposes onlyView more

Valvoline Synpower 10W40 Engine Oil

Valvoline Synpower takes over from where the highly popular Durablend left off. The superior additive technology used in Synpower offers advantages over other semi-synthetic and mineral engine oils. Synpower provides improved protection for engines operating under tough conditions, which include – cold, high temperatures, short journeys where full operating temperature is not reached, stop-start city driving with long periods of idling, and long distance driving at high RPM. Valvoline Synpower provides extra durability for a broad range of applications. Approvals : VW50200/50500 MB-APPROVAL_229.1 RENAULT RN0700/0710 Available in 1 Litre and 5 litre sizesView more

Valvoline VR1 Racing Oil

With over 100 years of motor racing innovation and experience, Valvoline VR1 Racing lubricants are the leading edge of racing oil technology. Formulated to increase horsepower and protect high performance engines under race conditions, it provides the competitive advantage professional racers and enthusiasts seek. VR1 is available in a range of viscosities to suit most applications – 5W50 Fully Synthetic 20W50 Mineral 10W60 Semi SyntheticView more

1 2 3 5