Engine Pre Heaters

Sort By
View
Wolverine Heaters Engine Oil Pre Heater – 5 x 7 Inch

Wolverine Heaters Engine Oil Pre Heater – 5 x 7 Inch

Wolverine oil pre heaters offer a simple to fit yet highly effective solution to preheating the oil in your engine prior to initial start up. The low profile heater pads are designed using aerospace technology and attach to the sump pan or dry sump pan via the 'peel and stick' highly adhesive backing. Heat up time is 45-90 minutes depending on ambient temperature and the wolverine pads are capable of raising the oil to near full operating temperature. The benefits of this are -Improved cold starting (less strain on starter motor and battery)Reduces cold start wearProvides immediate lubricationReduces emulsification in the oilFull operating temperature is reached far quickerImproves Engine component lifeTwo sizes of Wolverine engine oil heater pads are available:3.5″ x 4.5″ – recommended for oil capacities 4.5-12 litres (250w)5″ x 7″ – recommended for oil capacities 12-25 litres (500w)Both sizes have a 6ft long cable.*The Wolverine heaters are designed for 240v use and a 13amp plug is required (not included). For wiring purposes the centre wire (green / yellow) is wired to earth pin and the other two wires are to live and neutral (it doesn't matter which way round they are wired). If you are unsure of how...View more

$114.48

1 retailer

Wolverine Heaters Engine Oil Pre Heater – 3.5 x 4.5 Inch

Wolverine Heaters Engine Oil Pre Heater – 3.5 x 4.5 Inch

Wolverine oil pre heaters offer a simple to fit yet highly effective solution to preheating the oil in your engine prior to initial start up. The low profile heater pads are designed using aerospace technology and attach to the sump pan or dry sump pan via the 'peel and stick' highly adhesive backing. Heat up time is 45-90 minutes depending on ambient temperature and the wolverine pads are capable of raising the oil to near full operating temperature. The benefits of this are -Improved cold starting (less strain on starter motor and battery)Reduces cold start wearProvides immediate lubricationReduces emulsification in the oilFull operating temperature is reached far quickerImproves Engine component lifeTwo sizes of Wolverine engine oil heater pads are available:3.5″ x 4.5″ – recommended for oil capacities 4.5-12 litres (250w)5″ x 7″ – recommended for oil capacities 12-25 litres (500w)Both sizes have a 6ft long cable.*The Wolverine heaters are designed for 240v use and a 13amp plug is required (not included). For wiring purposes the centre wire (green / yellow) is wired to earth pin and the other two wires are to live and neutral (it doesn't matter which way round they are wired). If you are unsure of how...View more

$90.25

1 retailer

Goodridge G-Heat Team Engine Pre-Heater

Goodridge G-Heat Team Engine Pre-Heater

The Goodridge G-Heat Team preheater is a professional, simple-to-use solution to cold-starting a competition engine. Regardless of your engines pedigree, preheating it before racing will increase its efficiency, fuel consumption and performance. Perhaps more significantly, there will be a noticeable reduction in wear, which ultimately means that your engine will last longer and potentially lead to increased life between rebuilds. Recognised by leading race and rally teams as well as engine builders, the industrial heater offers an integral pump, adjustable thermostat (0-80°C), adjustable speed and internal protective thermostat with manual reset. The G-Link dry breaks offer maintenance-free connections into the cars coolant circuit while the incredibly flexible 2.5m long convoluted hoses are braided in non-abrasive Kevlar preventing damage to engine components and bodywork. The military specification flight case ensures the unit is fully protected with enough room for additional international power adaptors and extension leads. The case also incorporates heavy duty rubber wheels and a telescopic handle for ease of mobility in the paddock. Supplied with dry break bleed assembly, 2 off aluminium female weld bosses and a moulded European 2 pin plug.View more

$2569.08

1 retailer

Automotive Plumbing Solutions Thermostatic Engine Pre Heater 3Kw Kit – 123

Automotive Plumbing Solutions Thermostatic Engine Pre Heater 3Kw Kit – 123

Trying to start an expensive, close tolerance race engine from cold can be like pressing the self-destruct button. Used by top race and rally teams who know the importance of getting engines up to temperature quickly and safely the APS (Automotive Plumbing Solutions) electric coolant pre heater kit is a must for any application where peak performance is required from the word go.The heater can be put into service a few hours before starting the engine or can work continuously in order to keep the engine permanently at the required temperature.Available as a complete kit with a 230v AC heater with integrated circulation pump, fixation kit, ¾” hose (12ft / 3.6m long), male and female ¾ BSP dry break fittings and weld on adaptors for connection to the vehicles cooling system.Strong die-casted aluminium bodyCompact yet powerful, with integrated circulation pump into the heating body allowing for fast and homogenous preheatingAdjustable thermostat 0-80°CFlowrate: 1.6 to 2m3/h to 3m height manometerAdjustable speedA security thermostat with manual reset (rated 25A) protects the system in case of overheating due to a lack of water in the coolant circuit.Two years warrantyPlease note, the kit is fitted with a Euro 2 pin plug.View more

$1265.37

1 retailer