Brake Line Kits

FILTER
LIST
GRID

What Are Brake Line Kits?

The master cylinder is the centermost part of the brake system. This is where foot pressure is converted into hydraulic pressure for a vehicle to stop. Within the brake system are lines and brake hoses used to transport fluid to the wheel cylinders and callipers. Whenever most car owners think of brakes, rotors, pads and callipers are what come to mind. Lines are not often included here. However, brake lines are vital components that cannot be ignored. Every time brake service is performed, the lines should also be inspected. Note that ordinary steel tubing is highly discouraged for automotive use. This is because it does not have inner and outer protection and it is designed with single-wall construction. Brake lines designed for automotive use are coated with copper, soft-steel sheets and compressed into a double-wall tube. They are then brought into a high temperature to help them resist corrosion. ¼ and 3/16 are the two most common diameters in brake lines. Most automotive dealers sell standard brake lines.

Brake lines, being the lifeline of your brakes, require a lot of attention. They play a major role in the operation of the braking system. Their condition and age should determine the right time for a replacement. Without the brake line kits and the hose, any command sent by the brake cylinder would not reach the wheels, meaning your car would not have the ability to stop.

Different Types of Brake Lines

There are different types of brake lines. In most countries, they must conform to a certain standard in terms of pressure ratings and construction, among other aspects. The two types include:

Stainless Steel Braided Lines

They come with an inner hose that is sealed fully in a stainless steel mesh and designed from protective layers and a woven tapestry. These are stronger than most others and come packed with a high level of protection against foreign bodies such as debris. They have a better braking response and are firmer around the pedal. Steel lines tend to be highly resistant to swelling whenever fluid pressure builds. As such, fluid pressure moves to the wheels at a faster rate and does so efficiently. The lines reduce the outward expansion that is often rendered by the rubber brake lines, thus bringing down the spongy feel in the pedal. These are ideal for drivers expecting more from their braking systems. Note that the right amount of fluid force expected to get to the wheels is not affected by the type of brake lines used.

Rubber Brake Lines

Most cars have rubber brake lines. These tend to flex under heavy use, and make great choices for their durability and resilience and are often used for a long time without the need for replacement. Most car dealers opt for low maintenance and affordable parts, and as such, rubber tends to fit the categorisation perfectly. In fact, rubber brake lines are perfect for non-performance oriented drivers since when too much pressure is applied, they expand outward.

How Brake Lines can Improve a Car

For a long time now, car enthusiasts have purchased different types of brake lines, hoping to improve the performance of their vehicles. There are two types of brake lines that can be installed on your car, including stainless steel and rubber. Of the two, rubber is the cheaper. Some people believe that making an upgrade to stainless steel will automatically heighten their brake torque. However, understand that this type of brake line only boosts the fluid pressure of the brake versus the volume and not the fluid pressure versus brake torque. Unless you are upgrading your old vehicle to stainless steel, then there would be no point in changing your rubber brake line. So, how do brake lines improve your vehicle’s performance?

One major task of any performance brake lines that you choose is to safeguard the performance of your brake system. Every time you drive, you need brakes that can respond instantly should anything happen fast to avoid crashing. They are designed to transmit the pressure that the driver applies to the brakes around the wheels without fail.

For heavy duty such as offloading it might be necessary to go for the braided brake lines since these are tougher and better at resisting impacts. If the brakes are damaged, it is easy for moisture to find its way into the entire system. In turn, vapour locks may begin to form in the fluid of the brakes and braking may be impossible. Since it is not easy to tell your brake lines are damaged, it is vital to have them checked regularly.

Get a brake line replacement since it might be a waste of time to go through the hassle of flaring the tube ends. It might be necessary to go for replacement brake line kits for installation. The lines are designed for specific applications and come with the right fittings and diameter for replacement.

Frequently Asked Questions about Brake Line Kits

What is the best material for brake lines?

The best materials for brake lines are:

  • Stainless Steel: Highly resistant to corrosion and offers excellent durability. Ideal for high-performance vehicles.
  • Copper-Nickel Alloy: Combines the benefits of copper and nickel, providing good corrosion resistance and flexibility.
  • Rubber: Commonly used for flexible brake lines, it offers good flexibility but may degrade over time due to heat and exposure to brake fluid.
  • PTFE (Polytetrafluoroethylene): Known for its chemical resistance and low friction, often used in high-performance applications.

What is a brake duct?

A brake duct is a component used in vehicles to enhance the cooling of the brake system. It directs airflow towards the brake components, helping to dissipate heat generated during braking. Key functions of brake ducts include:

  • Improving brake performance by maintaining optimal temperatures.
  • Reducing the risk of brake fade, which can occur when brakes overheat.
  • Extending the lifespan of brake components by preventing excessive heat buildup.
Brake ducts are commonly found in high-performance and racing vehicles, but they can also be beneficial in regular road cars, especially in demanding driving conditions.

Does anti-roll bar affect steering?

Yes, an anti-roll bar can affect steering. It plays a crucial role in maintaining vehicle stability during cornering, which indirectly influences steering response. Effects of an anti-roll bar on steering include:

  • Improved Handling: By reducing body roll, the anti-roll bar helps keep the tyres in better contact with the road, enhancing grip and steering precision.
  • Steering Feedback: A stiffer anti-roll bar can provide more direct feedback to the driver, making the steering feel more responsive.
  • Understeer/Oversteer Balance: The design and stiffness of the anti-roll bar can influence the balance of the vehicle, potentially leading to understeer or oversteer, which affects steering behaviour.

Is an anti-roll bar necessary?

An anti-roll bar, also known as a sway bar, is not strictly necessary for a vehicle to operate, but it plays a significant role in enhancing handling and stability. Benefits of an anti-roll bar include:

  • Improved Handling: It reduces body roll during cornering, allowing for better control.
  • Increased Stability: It helps maintain a level stance, improving traction and grip.
  • Enhanced Safety: By minimising roll, it can prevent loss of control in sharp turns.
While some vehicles may perform adequately without one, especially in everyday driving conditions, an anti-roll bar is particularly beneficial for performance-oriented cars or those frequently driven in challenging conditions.

How do anti-roll bars affect handling?

Anti-roll bars, also known as sway bars, play a crucial role in a vehicle's handling by reducing body roll during cornering. They connect the left and right sides of the suspension, helping to distribute weight more evenly across the vehicle. Effects on Handling:

  • Improved Stability: Anti-roll bars enhance stability by limiting the amount of body lean, allowing for better control during turns.
  • Increased Grip: By reducing body roll, they help maintain tyre contact with the road, improving grip and traction.
  • Enhanced Cornering Performance: They allow for sharper and more responsive cornering, making the vehicle feel more agile.
  • Reduced Understeer/Oversteer: Adjusting the stiffness of anti-roll bars can help balance the handling characteristics, reducing tendencies towards understeer or oversteer.

Is an anti-roll bar necessary?

An anti-roll bar, also known as a sway bar, is not strictly necessary for a vehicle to function, but it plays a significant role in enhancing handling and stability. Benefits of an anti-roll bar include:

  • Improved Handling: It reduces body roll during cornering, allowing for better control.
  • Increased Stability: It helps maintain a level stance, improving traction and grip.
  • Enhanced Safety: By minimising roll, it can prevent loss of control in sharp turns.
While some vehicles may perform adequately without one, especially in everyday driving conditions, performance-oriented cars typically benefit from having an anti-roll bar for optimal handling characteristics.

Can you bleed brakes on your own?

Yes, you can bleed brakes on your own with the right tools and technique. Here’s how to do it: Tools Needed:

  • Brake fluid
  • Wrench or socket set
  • Clear plastic tubing
  • Container to catch fluid
  • Helper (optional)
Steps to Bleed Brakes:
  1. Start by ensuring the vehicle is on a level surface and the engine is off.
  2. Locate the brake bleeder valve on each brake caliper or wheel cylinder.
  3. Attach the clear plastic tubing to the bleeder valve and place the other end in a container.
  4. Have someone pump the brake pedal several times and hold it down.
  5. Open the bleeder valve to release air and old fluid, then close it before your helper releases the brake pedal.
  6. Repeat this process until you see clear, bubble-free fluid in the tubing.
  7. Check the brake fluid level in the master cylinder and top it up as necessary.
Make sure to follow the specific instructions for your vehicle model, as procedures may vary.

How much does it cost to fix bleeding brakes?

The cost to fix bleeding brakes can vary based on several factors, including the make and model of the vehicle and the labour rates in your area. Generally, you can expect the following costs:

  • DIY Bleeding: If you choose to bleed the brakes yourself, the cost may be minimal, typically around £10 to £30 for brake fluid.
  • Professional Service: Hiring a mechanic can cost between £50 and £100, depending on the garage and the complexity of the brake system.
  • Additional Repairs: If there are underlying issues (e.g., leaks or damaged components), costs can increase significantly, potentially ranging from £100 to £500 or more.

How often should you bleed your brakes?

Bleeding your brakes is essential for maintaining optimal braking performance. It is generally recommended to bleed your brakes:

  • Every 1-2 years as part of regular maintenance.
  • Whenever you replace brake components, such as calipers or brake lines.
  • If you notice a spongy brake pedal or reduced braking performance.
  • After any brake fluid contamination or leaks.
Always refer to your vehicle's owner manual for specific recommendations related to your make and model.

What do brake bleeders do?

Brake bleeders are essential components in a vehicle's braking system. Their primary function is to remove air bubbles from the brake lines, ensuring that the brake fluid can flow freely and effectively. This process is crucial for maintaining optimal braking performance. Key functions of brake bleeders include:

  • Allowing for the expulsion of air trapped in the brake lines.
  • Facilitating the replacement of old brake fluid with fresh fluid.
  • Ensuring consistent brake pedal feel and responsiveness.
  • Preventing brake system failure due to air contamination.
Properly functioning brake bleeders contribute to the overall safety and efficiency of a vehicle's braking system.

Built by car enthusiasts, for enthusiasts, Compare Parts is the ultimate marketplace for car enthusiasts. 

Founded in 2008, we've been dedicated to bringing you the best in performance parts. Our marketplace offers top-quality car parts from leading brands worldwide, making it easy to compare car parts and find exactly what you need.
2008-2024 Bravr Ltd is a company registered in England and Wales | Company: 6045335 | VAT ID GB 917 288 301
"Life is too short to drive stock cars" - Shahin Fard
My CP

Nothing to see here 😒

Your cart...💰

No products in the cart.

Cart
Theme
homeusercartcrosschevron-leftchevron-right