GBP £

Pro Tune PR-8 – ECU

Pro Tune PR-8 is an advanced electronic engine management system and data acquisition ECU. It has integrated tools for control of injection and ignition systems up to 8 cylinders in sequential mode, or up to 12 cylinders in semi sequential mode, compatible with most 2 and 4 stroke engines.

The Pro Tune PR-8 is one of three ECU's currently offered by Pro Tune.

current lowest price

£1750.00

VISIT SHOP

RETAILERS

1 Retailers

Retailer	Location	Delivery	Price	Currency
Last update: 21-01-2019 17:00			£1750.00		VISIT SHOP

Disclaimer: We may receive a small commission at no cost to you if you choose to purchase a car part through a vendor on the site. This helps us keep the lights on and the site running. Read our FAQ for more information.

PRODUCT INFORMATION

The Pro Tune PR-8 is one of three ECU’s currently offered by Pro Tune.

Pro Tune PR-8 Product Overview

Standard Functions

Dual Boost Control
Launch Control
Full Throttle Shift
Secondary Injector Bench
Lambda Learning
Dual Lambda Control (external controller required).
Peak and Hold
Custom CAN
Asymmetric Ignition
User Programmable Functions
Lambda Control
Idle Control
Emergency Map
Continuous Internal Data Logging – 32Mb
Anti Lag

Fully Enabled Functions

Traction Control
Quad Cam Control
Dual ETC Control (external driver required for 2 throttles).

Features

8 user-programmable functions, allowing customisation of to meet specific requirements of each application.
Pre-defined protection strategies in events such as oil pressure, fuel pressure, temperature etc.
Quad cam control for intake and exhaust VVT, up to 2 cylinder banks with closed loop control and position target.
Compensation strategy in the event of camshaft position sensor synchronisation errors.
2 manufacturer specification automotive connectors allowing 22 auxiliary inputs and 12 auxiliary outputs.
5 dedicated digital inputs.
integrated 128Mb datalog memory.
Dual Electronic Throttle Control (external driver needed for bank 2).
Dual integrated k-type thermocouple conditioner.
Powered USB port for programming or data download.
Pin-out compatible with PR440, PR660 and PR-4 ECUs, avoiding modifications to existing wiring harnesses.
Decimal fuel map, providing 40 times more resolution.
Fuel cut map based on TPS or pedal position.
2 5V outputs for sensors with independant circuits.
8V outputs for sensors.
Customisable CAN to aid OEM installations, providing up to 16 IDs / 4 channels each.
Anti-lag with electronic throttle actuation.
Free Air Calibration for Wideband Lambda NTK / Bosch.
Asymmetric Ignition for specific applications such as Wankel, Cross Plane and Odd Fire engines.
Machined billet aluminium body with fixing bracket.
Resettable Engine run time counter.
Configuration / calibration via Workbench PRO.

Characteristics

Dual integrated lambda probe controller with high-precision closed loop control for fuel injection adjustment.
Dual boost control for engines with two cylinder banks per closed loop. Pressure target with different strategies. Compensation for gear position, speed, auxiliary input, release time and 3D map clamp.
Integrated Peak and Hold (low impedance) injector control.
Individual trim by cylinder.
3D injection phase map.
User defined trigger wheels and multi-tooth strategy for unusual trigger patterns.
Multi-tooth phase sensor compatible.
Fuel and ignition maps by TPS, MAP or MAF.
3D load compensation map.
3D lambda self-learn map.
Fully configurable pedal position vs TPS ratio.
Injection and/or ignition soft & hard cut rev-limiter.
Over-boost protection.
Start/stop button strategy.
Traction control with operation strategy for 1 to 4 speed sensors.
Compensation and hysteresis for A/C compressor activation.
PWM water pump control.
Diagnostic channels for crank & phase sensors.
Advanced setups for cranking and post-start.
Strategy for engine flood clearing.
3D Emergency map.
Auxiliary injector rail with smooth activation and automatic calculation of fuel injection.
Ability to activate auxiliary injector rail in sequential mode for engine with up to 8 cylinders.
Volumetric efficiency calibration using fuel tables and ignition timing in 3D maps.
Continuous datalog recording with up to 250 simultaneous channels, up to 50Hz with automatically adjusted frequency by channel.
250 kPa integrated MAP sensor.

Pro Tune PR-8 Product Specification

General

Compact anodized aluminium chassis.
2 automotive waterproof connector with 48 pins and 23 pins.
100 MHz Dual-core processor.
USB communication.
Fixing bracket.
Weight: 580g.
Dimension: 154 x 123 x 40 mm.

Supply

7 to 22 V.
Maximum consumption of 20A @ 12 V.

Outputs

Injector outputs: 8
Ignition outputs: 6
Auxiliary outputs: 11
5V sensor outputs: 2
8V sensor outputs: 1
Ground sensor outputs: 2

Sensors

Integrated MAP sensor: 1
Lambda sensor support: 2
Synchronism inputs: up to 5

Inputs

Specific inputs for: CKP, CMP and Lambda Sensor.
Thermocouple conditioner type “k” inputs: 2.
Maximum 22 auxiliary inputs.
Digital inputs (frequency measurement): 8 of 22.
Auxiliary voltage inputs: 17 of 22.
Auxiliary temperature inputs: 14 of 22.
Digital switches auxiliary inputs: 14 of 22.

Communications

Serial interface: 1
USB interface: 1
CAN interface: 1

Resources

Outputs test.
Emergency map.
Compensation via Dash Logger.
Firmware updates.
CKP/CMP reading.
Errors verification.
Password protection.
Internal Data logging: 128Mb (10 channels on 10 Hz – 6 h)/ (10 channels on 1 Hz – 60 h)

Pro Tune PR-4 User Manual and Datasheet

Pro Tune Software Downloads

Pro Tune Workbench PRO (Software Download Link)

Workbench PRO® is Pro Tune’s calibration software used in conjunction with the brand’s equipment. Developed to combine functionality and performance to configure engine parameters and control variables, with graphical tools to aid in calibration and visualisation of data in real time to ensure greater practicality. Workbench PRO is versatile and provides a complete engine management solution with Pro Tune ECUs.

Pro Tune Analyzer (Software Download Link)

Analyzer® is Pro Tune’s data analysis software. It brings together a set of tools such as graphs, histograms and reports that allow fast analysis of data stored in the memory of the ECU or TDL SD Card. This software makes it is possible to interpret the engine parameters before making calibration adjustments, setting alarms and diagnosing engine faults. The other side of the software allows the user to study the theoretical lap times, compare GPS traces simulating the vehicle in motion and view time difference between point-to-point laps.

MORE INFO

AIM Motorsport Analogue Sensors – Brake Pressure 0-100 Bar, -3 JIC

£180.00

Details

Visit Shop

BRAND SPOTLIGHT

DOMINATE THE TRACK

Designed and tested specifically for track day enthusiasts and for drivers who demand the utmost performance from their cars, MeisterR coilover kits offer superior performance for both normal driving and demanding track day sessions.

MEISTERR PRODUCTS

Pro Tune PR-8 – ECU

The Pro Tune PR-8 is one of three ECU's currently offered by Pro Tune.

RETAILERS

1 Retailers

PRODUCT INFORMATION

The Pro Tune PR-8 is one of three ECU’s currently offered by Pro Tune.

Pro Tune PR-8 Product Overview

Standard Functions

Fully Enabled Functions

Features

Characteristics

Pro Tune PR-8 Product Specification

General

Supply

Outputs

Sensors

Inputs

Communications

Resources

Pro Tune PR-4 User Manual and Datasheet

Pro Tune Software Downloads

Pro Tune Workbench PRO (Software Download Link)

Pro Tune Analyzer (Software Download Link)

ADDITIONAL INFORMATION

Categories

Brands

Vehicles

Related Products

AIM Motorsport 712-712 CAN Extension Lead – 4 Pin

AIM Motorsport 712-712 CAN Extension Lead – 5 Pin

AIM Motorsport 712-DIN (Mignon Yellow Plug) Patch Lead

AIM Motorsport 712-DIN (Mignon Yellow Plug) Patch Lead – 4 Pin (712 Metal Binder)

AIM Motorsport 712-DIN (Mignon Yellow Plug) Patch Lead – 4 Pin (719 Plastic Binder)

AIM Motorsport Analogue Sensors – Boost Pressure 0-10 Bar, M10 x 1

AIM Motorsport Analogue Sensors – Brake Pedal Position Sensor

AIM Motorsport Analogue Sensors – Brake Pressure 0-100 Bar, -3 JIC

BRAND SPOTLIGHT