Wider is Better®! H&R TRAK+® Wheel Spacers move your wheels and tires outwards so they are more flush with the fender-instantly giving your vehicle the perfect stance. High end sports car manufacturers use every millimeter of fender space available in their design for the best looks and highest performance and so should you. With TRAK+® you can fill the gap in your fenders and GO WIDE!
TRAK+® Wheel Spacers are manufactured from a special proprietary alloy specifically developed for H&R that is lighter and has a higher tensile strength than 6061-T6 billet aluminum. H&R TRAK+® Wheel Spacers are hubcentric and feature a full contact hub-just like the factory hub-for even load force distribution and lateral support.
Select applications now also available in black hard anodized.
- Widen vehicle track with TRAK+® Wheel Spacers
- ‘Perfect fit’ hubcentric design
- Durable lightweight aluminum/magnesium alloy
- Affordable and easy to install
- Bolt Pattern: 5/114.3
- Center Bore: 66.2
- Thread Type: 12×1.25
- Spacer Type: DRS
- Width: 5mm
- Stud Type
These are hub-centric flat disc type spacers which require the factory hub to center the wheels. Please measure to verify.
Depending on model, axle and year, Nissan vehicles have different diameters in the shoulder of the studs. The following list provides notes and measurements of the shoulder studs required for installation. The wheel spacers shown in the catalog will be supplied with shoulder bolts d = 14.25. If you need d = 12.85, please add a “1” at the end of the part number.
|DRS Wheel Spacers – Nissan|
DRS wheel spacers / required DRS shoulder
|Vehicle||Model||Shoulder||Front Axle/Shoulder||Rear Axle|
|SENTRA||B13||GA 16 + SR20 DE||large 14.25mm||large 14.25 mm|
|100||NX||B13 GA 16 + SR 20 DE||large 14.25 mm||large 14.25 mm|
|ALMERA||N15||all||large 14.25mm||large 14.25 mm|
|PRIMERA||P10||2WD||large 14.25 mm||large 14.25 mm|
|PRIMERA||P11||all||large 14.25 mm||large 14.25 mm|
|200 SX||S13||CA18 T||small 12.85 mm||small 12.85 mm|
|200 SX||S14||SR 20 DET||large 14.25 mm||small 12.85 mm|
|300 ZX||Z32||VG 30 DTT||large 14.25 mm||small 12.85 mm|
|MAXIMA||J30||up to 10/91||small 12.85mm||small 12.85 mm|
|up to 12/94||large 14.25 mm||small 12.85 mm|
|from 01/95||large 14.25 mm||large 14.25 mm|
|MAXIMA||A32||VQ 20 + 30DE||large 14.25 mm||large 14.25 mm|