Honda Del Sol

Sort By
View

Exide Excell Car Battery 159

Exide Excell Batteries are high quality and high performance batteries for everyday applications. They are normally recommended for standard cars, with standard electronic systems. For higher drain systems we recommend using Exide Premium batteries. The Amps Per Hour (Ah) Capacity of the battery is 45 Ah This is a Aftermarket type car battery The Cold Cranking Amps (CCA) of this battery is 330 A This Car battery comes with a 3 Year Manufacturer Guarantee The Length of the Battery is 237 mm The Width of the car battery is: 127 mm The Height of the Battery is 225 mm The Battery terminals are type 1/1 The UK Reference no for this battery is 159 Product Code: 444771590View more

from $93.48

2 retailers

Bosch S4 Car Battery 159

Bosch S4 car batteries are a high quality, premium replacement for you original car battery. The Bosch S4 range has up to 15% more Cold Cranking power than the original equivalent, and up to 20% longer service life thanks to Boschs innovative Power Frame technology. All Bosch S4 batteries are maintance free meaning you do not need to top up, or change the water. Bosch S4 car batteries are ideal for modern vehicles which require a higher quality battery The Amps Per Hour (Ah) Capacity of the battery is 45 Ah This is a Aftermarket type car battery The Cold Cranking Amps (CCA) of this battery is 330 A This Car battery comes with a 4 Year Manufacturer Guarantee The Length of the Battery is 238 mm The Width of the car battery is: 129 mm The Height of the Battery is 225 mm The Battery terminals are type 1/1 The UK Reference no for this battery is 159 Product Code: 444771597View more

from $99.10

2 retailers

Lion 159 Car Battery

Lion Performance batteries are able to withstand the pressures of day to day use, and are still excellent value for money. All Lion batteries carry a 3 year guarantee for peace of mind and are created to match original specifications. The Amps Per Hour (Ah) Capacity of the battery is 45 Ah This is a Aftermarket type car battery The Cold Cranking Amps (CCA) of this battery is 330 A This Car battery comes with a 3 Year Manufacturer Guarantee The Length of the Battery is 234 mm The Width of the car battery is: 128 mm The Height of the Battery is 225 mm The Battery terminals are type 1/1 The UK Reference no for this battery is 159 Product Code: 444771591View more

from $75.13

2 retailers

Hondata S300 – Honda B/D/F/H-Series [Plug & Play ECU]

Complete plug and play package with the latest Hondata S300 ready installed. This is the complete plug and play ECU package for those wanting to use Hondata S300 Version 3. For those who’d like to use the boost control features of the S300 software. Please note: For use on manual transmission vehicles only. You will require an ECU Jumper harness if you have an OBD0, OBD2A, or OBD2B chassis (before 1992 or after 1995). Specification/Info 8 analog inputs.(datalogging only) 1 digital input. (datalogging only) Additional security to help identify and prevent theft Datalogging memory doubled in size for up to 2 hours recording. Non battery memory backup for greater reliability and longer life. On board calibration storage. USB and Radio technology connection for speed and compatibility SManager Windows based software for parameter & table editing, calibration uploading and datalogging. Real-time updating of ECU parameters & tables. Built in calibrations for common engine combinations Built in datalogging to a laptop On board datalogging memory (4 MB memory, 20-240 minutes datalogging) with trigger conditions. Adjustment for different sized injectors, with overall fuel trim. Configurable for any MAP sensor (to 5 Bar and above) TPS based table lookup for ITBs Engine protection from over boost. Expanded fuel and ignition tables to 60 +...View more

$805.22

1 retailer

Hondata Kpro 4 [Supplied & Calibrated] ECU

The KPro4 is the 4th generation board made by Hondata, Superseding all previous versions, with a more powerful processor, enhanced on board datalogging, faster upload and datalogging, live tuning and auto-tune, Bluetooth, ethanol sensor input, dash outputs, advanced protection and closed loop wideband support. It allows you to install and then customise a calibration specifically tailored for the your car. The prices quoted include supply, fitment and calibration including dyno time. If the product is purchased online we will arrange a call with yourself to discuss suitable dyno dates and times. Specification/Info Fits inside the ECU Designed and assembled in USA USB connection for speed and compatibility KManager Windows based software for parameter & table editing, calibration uploading and datalogging. Many built in calibrations for common engine combinations Built in datalogging to a laptop On board datalogging memory (8 MB memory, 10-215 minutes datalogging) Adjustment for different sized injectors, with overall fuel trim. Configurable for any MAP sensor (to 5 Bar and above) TPS based table lookup for ITBs Engine protection from lean air fuel ratios, over boost and low oil/fuel pressure. Expanded fuel and ignition tables, both in rpm and load, to 60 lbs boost and 11,000 rpm (these are not the upper...View more

$1214.24

1 retailer

Skunk2 K-Series (non-Civic Si) Composite Fuel Rail

Skunk2’s cutting-edge Composite Fuel Rail for Honda’s K-series engines (non-Civic Si) is here. Skunk2’s Composite Fuel Rails are made using a proprietary carbon-impregnated, aerospace thermo-polymer composite—a material that’s 33-percent lighter, 60-percent stronger, and operates up to 100-degrees F cooler when compared to aluminum and insulates fuel from both radiant and conductive heat transfer underneath the hood, resulting in increased horsepower and torque. Composite Fuel Rails also feature large 0.625-inch internal bores for superior fuel injector pulsation dampening, are machined with a smooth interior finish, and feature radius-cut fuel injector outlets for improved flow characteristics. The special design that eliminates the sharp internal angles where the main bore meets the fuel injector bores inherent with conventional extruded- and drilled-aluminum designs can only be achieved with such composite materials. Skunk2’s K-series Composite Fuel Rails are compatible with the factory fuel system, as well as all fuels, including alcohol, and can support up to 1,200 hp, with gains as high as three percent realized during testing.View more

$255.62

1 retailer

Skunk2 Honda B-Series Composite Fuel Rail

Skunk2’s cutting-edge Composite Fuel Rail for Honda’s B-series engines is here. Skunk2’s Composite Fuel Rails are made using a proprietary carbon-impregnated, aerospace thermo-polymer composite—a material that’s 33-percent lighter, 60-percent stronger, and operates up to 100-degrees F cooler when compared to aluminum and insulates fuel from both radiant and conductive heat transfer underneath the hood, resulting in increased horsepower and torque. Composite Fuel Rails also feature large 0.625-inch internal bores for superior fuel injector pulsation dampening, are machined with a smooth interior finish, and feature radius-cut fuel injector outlets for improved flow characteristics. The special design that eliminates the sharp internal angles where the main bore meets the fuel injector bores inherent with conventional extruded- and drilled-aluminum designs can only be achieved with such composite materials. Skunk2’s B-series Composite Fuel Rails are compatible with the factory fuel system, as well as all fuels, including alcohol, and can support up to 1,200 hp, with gains as high as three percent realized during testing.View more

$255.62

1 retailer

SpeedFactory Racing 70mm Throttle Body w/ Thermal Gasket

Introducing SpeedFactory Racing’s precision cast 70mm Throttle Body for Honda B, D, F, and H series – bolt-on increased airflow, throttle response, and power gains on both naturally aspirated and forced induction applications while retaining smooth throttle operation, drivability, and the ability to fine tune your idle with the plate position & idle air adjustment screws. This is our recommendation for most street/strip applications ranging from aggressive naturally aspirated to high output forced induction setups because it gives great throttle response and power gains throughout the powerband – all while retaining good smooth drivability characteristics. Features: Precision machined Brass Throttle Plate Fully Machined Tapered Bore Dual Ball Bearings for smooth operation Includes BOTH high quality composite 70mm throttle body gasket and SFR Thermal 70mm Throttle Body Gasket Reduced heat transfer from Thermal Gasket = more power, reduced detonation High quality zinc-plated mounting bolts and TPS hardware are included Designed for use with OEM Throttle Cable and bracket Throttle Plate Stop Adjustment Screw Laser-etched SpeedFactory “SFR/70MM” logo Black Anodized Idle Air Adjustment Screw NOTE: Manual transmission models only. Not compatible with OEM B18C GSR, ’88-’91 D-Series, or downflow intake manifolds. Does not fit F22C (F20C is ok). Designed for use on...View more

$130.36

1 retailer

Skunk2 Honda B-Series Pro Series Camshafts Pro 3+

Gain an extra 25+ hp with Skunk2’s Pro 3+ Camshafts, our professional line of high-lift, racing camshafts for Honda’s B-series VTEC engines. Pro 3+ Camshafts are designed to optimize mid-range and top-end horsepower and torque, raising peak power 700 rpm higher than what Pro 2+ Camshafts allow for. As a result, VTEC crossover is seamless, allowing for the broadest powerband possible. No other line of racing camshafts even comes close to Skunk2’s Pro Series. Skunk2’s Pro Series Camshafts for Honda’s B-series engines dramatically increase both horsepower and torque yet retain complete valvetrain stability and exceptional engine response. Ideal for heavily modified engines, Pro Series Camshafts are manufactured from proprietary, high-quality cores, are CNC ground, and feature patent-pending profiles with unique lobe shapes and revolutionary lift, velocity, and acceleration characteristics. Skunk2 camshafts deliver unparalleled power as a result of continual, extensive development and testing. By utilizing advanced manufacturing techniques and the latest computerized simulation and modeling equipment, Skunk2 camshafts are able to deliver maximum power across the entire powerband. Skunk2 designs and tests all of its camshafts in-house to ensure the highest quality and performance. Each camshaft is manufactured of newly revised chill-cast, billet camshaft blanks that have increased torsional strength,...View more

$880.63

1 retailer

Skunk2 Honda B-Series Tuner Series Camshafts Stage 1

Gain an extra 10-15 hp and retain your factory idle and low-speed emissions with Skunk2’s Tuner Series Stage 1 Camshafts, our introductory line of high-performance camshafts for Honda’s B-series VTEC engines. Tuner Series Stage 1 Camshafts are designed to optimize horsepower and torque on mildly modified engines. As a result, VTEC crossover is dramatic, allowing for that classic primary-to-secondary surge. What’s more, Tuner Series Stage 1 Camshafts are also CARB-approved and remain the only high-performance, B-series camshafts legal for road use. No other line of high-performance camshafts even comes close to Skunk2’s Tuner Series.View more

$782.22

1 retailer

YCP Vitara Pistons with SpeedFactory Standard Length H-Beam Rods D16

This is a combo kit for YCP Vitara Pistons and SF Standard Length H-Beam Connecting Rods. The pistons include: – 4 YCP Pistons, Pins, Clips, and Piston Ring Set We have pushed the limits of these pistons on our own engines. We currently hold the world record for horse power on these pistons in a stock sleeve D16Z6. We have used these in countless street engines that produce up to 400HP on a streetable pumpgas setup. – YCP pistons are made from a much stronger cast material (AC8A Grade) – 19mm Floating Wrist pins that fit our D16 forged rods perfectly – T-6 Heat treated for even greater strength. – Highly resistant to heat – Dual oil holes to provide better Wrist Pin Lubrication – Teflon coating provides smoother running, increase piston life, improve cylinder sealing for less blow by and more power, reduces friction, and helps prevent damage from inadequate lubrication during cold start-ups.View more

$587.94

1 retailer

Competition Clutch Triple Disc Multiplate Clutch Kit Honda Users B/K Series

Competition Clutch Triple Disc Multiplate Clutch Kit Competition Clutch provides the most economical racing clutch for the active sport compact enthusiast and is the preferred assembly for the professional racer. The CCI Triple Disc delivers uncompromised reliability and performance. All assemblies are plug and play with no additional modifications required in the transmission. Guaranteed to provide simplicity in installation and inexpensive component repair and replacement. SpeedFactory Racing has been torture testing the new Competition Clutch Triple Disc in our 1400+whp 7 Second Outlaw car over the past 2 seasons.This clutch was designed to meet the needs of racers that are generating EXTREME power levels of 1100+hp.The addition of a 3rd disc and floater allows this clutch to handle even higher levels of torque & heat. We are happy to say that it has performed flawlessly, and is now available for purchase as a new product in the Competition Clutch lineup! This kit includes flywheel, floater plates, clutch discs, pressure plate and all hardware to assemble. Also included are flywheel bolts, custom release bearing, and alignment tool.View more

$1831.08

1 retailer