BRZ

Subaru BRZ (2012+) Parts

Current Filters

12 Products Available

33-5060 K&N Replacement Air Filter for the 2020 Subaru BRZ

K&N® washable, reusable High-Flow Air Filters™ feature a state-of-the-art design of layered, oiled cotton media engineered to improve airflow and capture contaminants, and are designed to provide an increase in horsepower. Each performance air filter is reusable, engineered to last for the entire lifespan of your vehicle, and backed by

Competition Clutch Subaru BRZ / FT86 (Push Style) Stage 4 Clutch Kit

Competition Clutch Stage 4 Clutch Kit The Competition Clutch Stage 4 kit is designed for highly tuned vehicles that are pushed to the limit on the track. The kit comes with a 6 paddle sprung cerametallic disc and a reinforced mechanism, allowing to withstand up to 200% more torque than stock. Unless stated otherwise, the Competition Clutch kits come with a

Competition Clutch Subaru BRZ / FT86 (Push Style) Stage 3 Clutch Kit

This assembly is suited for up to 150% increase in torque capacity. Provides quick but smooth engagement and extended life. 300 mile break-in recommended with this set-up. The 2600 Series kit includes a performance pressure plate, a high torque sprung disc with segmented Ceramic facings, all applicable bearings and the appropriate alignment tool.

Competition Clutch Subaru BRZ / FT86 (Push Style) Stage 2 Clutch Kit

The Competition Clutch stage 2 was designed for powerful, tuned road cars, but without all of the drawbacks of a heavy racing clutch. Key Features – Allows an increase in stock torque up to 80%. – Smooth engagement and an extended life with the Carbon Kevlar material. – A high performance pressure plate to allow for greater power. –

Competition Clutch Subaru BRZ / FT86 (Push Style) Lightweight Flywheel (6.10KGs)

Competition Clutch flywheels are made of 4140 forged steel and are a one-piece design. This helps significantly in reducing the chances of ring gear separation and friction surface warpage. All flywheels can be resurfaced. The correct flywheel step can be obtained in the CCI catalog or by calling us direct. Flywheel weights vary from 8lbs to 18lbs depending

Competition Clutch Subaru BRZ / FT86 (Push Style) 184MM Rigid Twin Disk (16.15KGs)

The CCI twin disc provides the most economical racing clutch for the active sport compact enthusiast. This ceramic twin disc comes with a 4140 forged steel flywheel and a 6061 T6 aluminium cover complimented with a 6150 steel diaphragm. These units are rated to hold 800 to 1200whp (depending on application). Competition Clutch brings to their customers the

£1164.48

MeisterR ZetaCRD Coilovers for Subaru on BRZ (ZC6) 2012 ON

MeisterR ZetaCRD for Subaru on BRZ (ZC6) 2012 ON are designed for road and track use with focus on ride compliance. Digressive damping with MeisterR CRD (Close Ratio Damping) technology, the ZetaCRD provides great ride quality over uneven road surfaces and superb control during occasional track use. Main Features: * 32-stage damping adjustments (Compression

MeisterR GT1 Coilovers for Subaru on BRZ (ZC6) 2012 ON

MeisterR GT1 for Subaru on BRZ (ZC6) 2012 ON is race proven suspension designed for the road and track. The GT1 coilovers for the Subaru on BRZ (ZC6) 2012 ON are manufactured and engineered by suspension masters in the UK. All Meisterr GT1 feature our unique Staggered Digressive Valve (SDV) technology which enables the damper to absorb uneven surfaces

£1849.00

Subaru BRZ Racing Thermostat, 2013+

This item also fits additional vehicles. See Tech Specs below.The Mishimoto racing thermostat for the 2013+ Subaru BRZ will promote greater cooling efficiency in your stock or modified FA20. Once the engine is fully warmed up, the Mishimoto racing thermostat will open at a lower temperature than standard thermostats. This allows coolant to flow through the

Subaru BRZ Performance Aluminium Radiator, 2013+

This item also fits additional vehicles. See Tech Specs below. The Subaru BRZ is the perfect car for tearing up back roads or hitting the autocross course. Aggressive driving results in increased engine temperatures necessitating an effective solution for keeping your flat four cool. Mishimoto has the perfect upgrade, the Subaru BRZ performance aluminium

Subaru BRZ / Toyota GT86 Plug-N-Play Aluminium Fan Shroud Kit, 2012+

Free up some space in your BRZ / FR-S / or GT86’s small engine bay with the Mishimoto Plug-N-Play aluminium Fan Shroud Kit! This kit bolts directly to your stock or MishimotoSubaru BRZ/Scion FR-SPerformance aluminium Radiator and works perfectly with the stock coolant overflow tank. The brushed aluminium fan shroud is preassembled in the correct

Subaru BRZ / Scion FR-S / Toyota GT86 Plug-N-Play Black Aluminium Fan Shroud Kit, 2013+

Free up some space in your FR-S / BRZ's small engine bay with the Mishimoto Plug-N-Play aluminium Fan Shroud Kit in Black! This kit bolts directly to your stock or Mishimoto Subaru BRZ / Scion FR-S Performance aluminium Radiator and works perfectly with the stock coolant overflow tank. The black anodized aluminium FR-S / BRZ fan shroud is preassembled