Racetech

Showing Products 1 - 19 out of total 19

View
Filters: Racetech

Racetech Temperature Indicators

These Racetech Temperature Indicators have a wide range of uses; brake calipers, brake discs, basically anywhere heat is generated! Available in the following kits: Kit A37-65°C Kit B71-110°C Kit C116-154°C Kit D160-199°C Kit E201-260°C Kit F149-260°C Kit G121-280ºC Each kit contains 10 self adhesive strips.View more

Racetech Fuel Level Gauge – Electrical

The Racetech 52mm diameter electrical fuel level gauge has a black dial face and a scale reading E 1/4 1/2 3/4 F.  Featuring a black bezel and a red needle with green illumination. The fuel gauge is not supplied with a sender unit but it is available separately – See accessories.View more

Racetech Oil Pressure – Water Temperature Dual Gauge

A reliable and accurate 52mm diameter mechanical gauge which displays both oil pressure and water temperature on a black dial face. The scale of the oil pressure display is 0-100 Psi and the water temperature is 30-110 degrees C. This dual gauge comes complete with a temperature capillary tube in options of 7, 9 or 12 ft lengths with a 3/8" BSP female fitting with a 3/8" to 3/8" male to male adaptor (easily adapted to 5/8" UNF or other sizes) The oil pressure side is 1/8" BSP male fitting and pipe kits are available separately. The gauges also have the option of having a -3 Aeroquip type fitting on the pressure side to allow a more professional type plumbing in.View more

Racetech Water Temperature Gauge Electrical

The Racetech 52mm diameter electrical water temperature gauge has a black dial face and a scale of 40-120 degrees C. Featuring a black bezel and a red needle with white illumination. Sender units and adaptors are not included but are available separately – See accessories.View more

Racetech Voltmeter

The Racetech 52mm diameter voltmeter has a black dial face and a scale of 10-16 Volts. Featuring a black bezel, red needle and white illumination. No sender unit required.View more

Racetech Water Temperature Gauge – Mechanical

The Racetech Water Temperature Gauge is a reliable and accurate 52mm diameter mechanical gauge with a black dial face displaying a scale of 30-110 degrees C. This gauge comes complete with a temperature capillary tube in options of 7, 9 or 12 ft lengths with a 3/8" BSP female fitting with a 3/8" to 3/8" male to male adaptor. Easily adapted to other thread types with additional male to male adaptors – see the fittings section for further details.View more

Racetech Oil Pressure – Oil Temperature Dual Gauge

The Racetech oil pressure and oil temperature gauge is a reliable and accurate 52mm diameter mechanical gauge which displays both oil pressure and oil temperature on a black dial face. The scale of the oil pressure display is 0-100 Psi and the oil temperature is 40-140 degrees C. This dual gauge comes complete with a temperature capillary tube in options of 7, 9 or 12 ft lengths with a 3/8" BSP female fitting with a 3/8" to 3/8" male to male adaptor. The oil pressure side is 1/8" BSP male fitting and pipe kits are available separately. The gauges also have the option of having a -3 Aeroquip type fitting on the pressure side to allow a more professional type plumbing in.View more

Racetech Oil Temperature Gauge Electrical

The Racetech 52mm diameter electrical oil temperature gauge has a black dial face and a scale of 50-150 degrees C. Featuring a black bezel and a red needle with white illumination. Sender units and adaptors are not included but are available separately – See accessories.View more

Racetech Oil Pressure Gauge – Mechanical

The Racetech Oil Pressure Gauge is an accurate and reliable 52mm mechanical gauge designed for motorsport use. Available with a black face and bezel with a white back light and with scale options of 0-100 or 0-160 Psi. The back of the gauge has a 1/8" BSP male flat seat fitting to allow the fitment of a pressure tube which is sold separately. There is also the option of having a -3 type fitting to enable the gauge to be plumbed in Aeroquip hose.View more

Racetech 80mm Tachometer with Shift Light

The Racetech 80mm tachometer is a fast acting tachometer with a choice of rev ranges and a compressed scale to provide a more accurate reading higher up the rev range. This particular model includes an integrated 3 stage shift light for accurate shifting and is ideal where cockpit space is limited as an auxiliary shift light is not required. Suitable for use with 4, 6 or 8 cylinder engines with 12 volt negative earth, single coil ignition systems.View more

Racetech 80mm Tachometer

The Racetech 80mm tachometer is a fast acting tachometer with a choice of rev ranges and a compressed scale for a more accurate reading further up the rev range. Suitable for use with 4, 6 or 8 cylinder engines with 12 volt negative earth, single coil ignition systems.View more

Racetech 80mm Speedometer

An electronic speedometer with an 80mm diameter, easy to read dial face and white back light. Built using the latest stepper motor technology to give an accurate needle reading and featuring an LCD odometer with resettable trip meter function. The Racetech speedometer is universal as the speed reading is taken from a sensor which uses any rotating part such as drive shaft or wheel hub as a reference. The speed sensor is supplied separately. See accessories for options. 0-140mph dial face.View more

Racetech In-line Fuel Pressure Gauge Isolator

The Racetech In-line Fuel Pressure Gauge Isolator allows the interior mounting of pressure gauges without the danger of having high pressure fuel lines within the driving compartment. Fitting the isolator between the pressure source and the gauge, when pressurised, the fluid pushes against a diaphragm inside the isolator, which transmits the pressure along an oil line connecting the isolator to the gauge. The corresponding fluid pressure is then displayed on the gauge. The isolator comes with two male 1/8 BSP threads with concave fitment. Please note:Designed for fuel injection systems only, as the pressure of a carburettor system isn’t enough to operate the valve.View more

Racetech Water Temperature Sender Unit For Racetech Gauge

A water temperature sender unit for use with Racetech electrical oil temperature gauges. The unit has a 1/8 NPT male thread, adaptors are available to allow fitment to other threads (see associated items). Note – This sender unit is only compatible with Racetech gauges from 2011 onwards. **Image is for illustration purposes only and actual part may differ**View more

Racetech Oil Temperature Sender Unit For Racetech Gauge

An oil temperature sender unit for use with Racetech electrical oil temperature gauges. The unit has a 1/8 NPT male thread, adaptors are available to allow fitment to other threads (see associated items). Note – This sender unit is only compatible with Racetech gauges from 2011 onwards.View more

Racetech Oil Pressure Sender For Racetech Gauge

An oil pressure sender unit with an M10 x 1 male thread suitable for Racetech electrical oil pressure gauges. T pieces and adaptors to fit the unit to various engines are available separately. See accessories for options.View more

Racetech F1 Side Mirror

Stripped out competition look for your road car, or need minimum weight and drag for your track day weapon ? Racetech F1 Side Mirrors are great for any race style or track day car – easy to adapt and fit to most doors / base plates with a simple single bolt fixing. The high impact nylon construction means these mirrors are very light, strong, and aerodynamic – ensuring minimal drag. Easily colour coded to bodywork or leave them in the ready to use black or white finishes. These race car mirrors are handed left or right, are available with flat or convex glass, and have options of fixed 60mm (35/25mm) or ball pivot adjustable 70mm (50/20mm) stems. Colour:White or black Glass Dimensions:110 x 50mm Sold individually.View more

Racetech Single Seater Mirrors

Stripped out competition look for your road car, or need minimum weight and drag for your track day weapon ? Racetech Single Seater Race Mirrors are great for any race style or track day car – easy to adapt and fit to most doors / base plates with a simple single bolt fixing. 30mm stem with adjustable ball pivot. High Impact Nylon construction of the low profile housing means these mirrors are very light, strong, and aerodynamic – ensuring minimal drag. Easily colour coded to bodywork or leave them in the ready to use black or white finishes. These race car mirrors are handed left or right, and are available in flat or convex glass options. Colour options:Black or White Glass Dimensions:110 x 50mmView more

Racetech Deluxe Tyre Pressure Gauge

Checking and maintaining the correct pressure in your rubber can help to extend tyre life and is essential for maintaining it's performance and safety, tyres that are under inflated can deform and overheat whilst over inflated tyres can lead to poor handling on the road or track. This 'Deluxe' tyre pressure gauge from Racetech has a quality dial that gives a clear and crisp display. With a flexible hose the largest of brake discs are of little bother and taking readings is easy and simple! The Compact and sturdy design is sheathed in rubber giving added protection from being banged or knocked about and the release button is positioned for ease of use, perfect for day to day checks or making last minute changes on race day when the pressure is really on!View more