E-Tech

Showing Products 1 - 24 out of total 58

View
Filters: E-Tech

E-Tech Engineering Ratstop Rodent Repellent Spray

The E-TECH RATSTOP rodent repellent is specially developed to help protect exposed cables, wiring and hoses from being chewed and gnawed by rodents, especially rats and mice. It is not a poison but rodents find the taste unpleasant and the smell agitates them so they do not settle in treated areas. Ideal for vehicles stored in rural or isolated garages and outbuildings Contents: 150ml AerosolView more

E-Tech Engineering Exhaust Trims

The polished stainless steel exhaust trims from E-Tech Engineering are a high quality construction to ensure durability and good looks. The exhaust trims are available in a choice of styles and sizes that will enhance the appearance of your vehicle. The tail pipes are easy to fit using the clamps provided, simply slide over your existing tail pipe and tighten for an instant improvement in appearance. Please note, the dimensions in brackets within the drop down menu correspond to the diameter of the exhaust the trim is to be fitted to. Supplied Individually.View more

E-Tech Engineering 6 Step Pipe Reducer

The universal 6 step pipe reducer is a must for anybody wishing to fit an exhaust system to their car, manufactured from mild steel it is easy to cut and weld on to the different pipes you may have. This product will coem to your rescue if you are fitting a DIY exhaust system. Image is for illustration purposes only.View more

E-Tech Engineering Surface Protection Film

The Surface Protection Film from E-Tech is a clear self adhesive PVC film that is ideal for protecting vehicles body work from scratches and stone chips. The water based adhesive allows the product to be removed with little or no residue. The film is designed for use on door handles, side skirts, bumpers and any other surface that is exposed to possible damage or scratches. Helps protect from stone chips, insect damage, minor scuffs and weathering. Simple to install and remove Helps prevent those little annoying scratches Can be used on cars, bicycles, motorbikes, boats or any painted surfaces Ideal for vulnerable areas where roof racks, bike racks or other accessories come into contact with the vehicles paintwork. Kit contains : 2 different film sheet sizes ( 2 x 1.40m x 20 cm and 1 x 1.40m x 30cm ), 1 squeegee and 1 film cutter.View more

E-Tech Engineering 12.5mm Thickness Hubcentric Spacer x2 Subaru 5×100/114.3 Fitment 56.1mm Bore

Developed as a specific fit for Subaru applications, the e-tech spacers are available with a dual stud pattern to enable a wide fitment range. The wheel spacers combine improvements in performance by widening the track, offering great appearance, yet also maintaining every day useability and desired handling characteristics. The spacers are manufactured to the usual high E-tech quality whilst also ensure great economy, tending to be one of the best pound for pound modifications for time/effort invested. The spacers are drilled in a dual stud pattern fitting popular Subaru models from 1993 right through to today and are all hub centric to ensure optimum wheel alignment and minimisation of run out. As spacers are wider than the original fitment, long wheel studs are recommended to be fitted. We would recommended as a general guideline to go 25mm longer than standard for this width of spacer.View more

E-Tech Engineering 12.5mm Thick Hubcentric Spacer x2 5×100/114.3 PCD 56.1mm Bore

Developed as a specific fit for Subaru applications, the E-tech spacers are available with a dual stud pattern to enable a wide fitment range. The wheel spacers combine improvements in performance by widening the track, offering great appearance, yet also maintaining every day useability and desired handling characteristics. The spacers are manufactured to the usual high E-tech quality whilst also ensure great economy, tending to be one of the best pound for pound modifications for time/effort invested. The spacers are drilled in a dual stud pattern fitting popular Subaru models from 1993 right through to today and are all hub centric to ensure optimum wheel alignment and minimisation of run out. As spacers are wider than the original fitment, longer 63mm length wheel studs are supplied with this kit. This ensures suitable thread length for mounting wheels and are also supplied to match the original thread diameter and pitch to ensure original wheel nuts car be used.View more

E-Tech Engineering 12.5mm Thick Hubcentric Spacer x 4 5×100/114.3 Fitment 56.1mm Bore

Developed as a specific fit for Subaru applications, the e-tech spacers are available with a dual stud pattern to enable a wide fitment range. The wheel spacers combine improvements in performance by widening the track, offering great appearance, yet also maintaining every day useability and desired handling characteristics. The spacers are manufactured to the usual high E-tech quality whilst also ensure great economy, tending to be one of the best pound for pound modifications for time/effort invested. The spacers are drilled in a dual stud pattern fitting popular Subaru models from 1993 right through to today and are all hub centric to ensure optimum wheel alignment and minimisation of run out. As spacers are wider than the original fitment, longer 63mm length wheel studs are supplied with this kit. This ensures suitable thread length for mounting wheels and are also supplied to match the original thread diameter and pitch to ensure original wheel nuts car be used.View more

E-Tech Engineering Metalic Silver Paint Touch Up Stick

This Touch up stick can be used to repair minor scrapes on metallic silver alloy wheels.View more

E-Tech Engineering Micro Alloy Wheel Repair Kit

The Micro Alloy Wheel Repair Kit from E-Tech is a very effective and economical repair system. The kit contains all the essential items needed to repair your alloy wheels and is ideal for minor scuffs, scratches and kerb damage. Its easy to damage your alloy wheels and its expensive, inconvenient and time consuming to get them refurbished. However the Micro Alloy Wheel Repair Kit is the solution so if your alloys are scuffed and looking second hand for a small investment in time and money you could dramatically improve the appearance and value of them and your car.View more

E-Tech Engineering Alloy Wheel Repair Kit

The Alloy Wheel Repair Kit from E-Tech provides all the components you need to repair your alloy wheels yourself and contains detailed instructions of how to achieve a professional finish that is virtually invisible to detect. Its easy to damage your alloy wheels and its expensive, inconvenient and time consuming to get them refurbished. However the Alloy Wheel Repair Kit is the solution for repairing deep scuffs, scratches, kerb damage to the rim and most other superficial non structural damage. So if your alloys are scuffed and looking second hand for a small investment in time and money you could dramatically improve the appearance and value of them and your car. Follow these simple steps to repair your alloy wheels : Clean the wheel Mix the alloy wheel putty and apply to the damaged area File, sand and shape the putty Mask the area and apply the paint Allow paint to dry Apply the lacquerView more

E-Tech Engineering Alloy Wheel Repair Putty

The alloy wheel repair putty from E-Tech is ideal for repairing damage to wheels which have been kerbed, scuffed or scratched. The repair putty comes in a 10cm tube and can be moulded to fill any imperfections in the wheel. Once the putty has hardened E-Tech silver alloy wheel paint and clear alloy wheel lacquer can be applied for a professional finish.View more

E-Tech Engineering Quick Align Wheel Tool

Quick and simple to fit, the Quick Align Tool allows wheels to be mounted to the hub with care and ease. The Tool simply screws into the bolt hole allowing you to use it as a guide for the wheel. Once secured with the other wheel bolts, the tool can be removed and the final bolt fixed. The Tool is available in a range of thread diameters/pitches for a huge range of applications and includes a handy storage case which can be stored in the glove box. Sold per pairView more

E-Tech Engineering Oil Catch Tank

The Oil Catch Tanks from E-Tech are CNC engineered from lightweight aluminium and are available in a choice of colours. The catch tank is designed to collect any crankcase oil and prevent any vapours recirculating back into the air intake, which also helps keep the engine oil cleaner for longer between service periods. The oil catch tank is universal fitment and is supplied with 15mm connectors and also has a visible level indicator. Dimensions: Diameter 80mm x Height 150mmView more

E-Tech Engineering Dual Tone Motor Sport Horn

The Dual Tone Motor Sport Horn is an ideal upgrade for any 12v original equipment fitted horn. It simply replaces the standard horn on your car and provides a powerful upgrade. The Horns are manufactured from tough black shock resistant ABS and produces a loud sharp pitch. The waterproof housing and coated external connectors guarantee long term performance. Specifications : 12v High tone – 500Hz, Low tone 400Hz – 110dbView more

E-Tech Engineering Digital Quartz Clock – 52mm

This digital quartz clock is powered from a 12v supply from the vehicle and features an LCD display with a black bezel. The ABS body is precision manufactured to be water and shock proof. The 24 hour display is switchable between white, green or red. Supplied with all necessary fittings.View more

E-Tech Engineering Lens Tinting Spray

The lens tinting spray from E-Tech is designed for use on headlights, side repeaters and rear lights for aggressive styling with minimal light reduction or distortion. The lens tint is easy to apply but also just as easy to remove if you wish to put lights back to standard. The lens tint is road legal when applied as per instructions and there is a choice of colours available.View more

E-Tech Engineering Lens Tinting Kits

The lens tinting kits from E-Tech are designed for use on headlights, side repeaters and rear lights for aggressive styling with minimal light reduction or distortion. The lens tint is easy to apply but also just as easy to remove if you wish to put lights back to standard. The lens tint is road legal when applied as per instructions and there is a choice of colours available. Lens tinting kit contains: 150ml tint spray, 150ml tint remover, 2 x 3M cleaner sachets.View more

E-Tech Engineering Lens Tint Remover

The tint spray is specially formulated to be easily removed if required without causing damage to the lenses. This can be done with the remover spray which needs to be applied to the lens, left for a couple of minutes then wiped clean. 150mlView more

E-Tech Engineering Ultra Light Filler

This E-Tech Ultra Light Filler is designed for use in repairs where weight reduction is a requirement. E-Tech Ultra Light Filler is used in various fields like motorsport, marine, cycling and modelling. Applied the same way as other fillers but due to its low density formula it is 50% lighter than competitors. For use on metal or alloy bodywork, rigid plastic and glass fibre.View more

E-Tech Engineering Full Length Door Edge Protector

Full length door edge protector from E-Tech is available in a choice of colours and offers protection that does not detract from vehicle lines. Ideal protection for the most prominent and exposed door edges. Supplied in 2 metre lengths.View more

E-Tech Engineering Transparent Protection Film

The E-Tech Engineering Transparent Protection Film provides an ideal solution where susceptible areas of bodywork require protection. Designed to protect against general wear and tear such as stone chips, bugs and minor scuffs/scratches, the film is transparent ensuring your vehicles appearance is not affected and is easy to apply as it can be cut to shape and features a self adhesive backing. Kit includes: Roll of Transparent Film (12.5cm x 3 metre length) Squeegee 2 x Cleaning sachets Instruction sheetView more

E-Tech Engineering Body And Bumper Guard

Body and bumper guard from E-Tech is a high quality self adhesive product designed to protect your vehicles body and paintwork from those accidental but annoying everyday knocks, bumps and scratches. Manufactured from a soft PVC compound with a high quality 3M adhesive tape which guarantees secure and long lasting adhesion. The PVC moulding is 48mm wide and 5mm thick and the kit supplied contains 1 x 5m roll and eight injection moulded end pieces to give a professional finish.View more

E-Tech Engineering Technik Detail Film

The E-Tech Engineering Technik Design Film provides a useful solution to protecting or styling various surfaces. The Technik Design Film is easy to fit as it can be cut to shape before being applied with the self adhesive backing. Available in 3 colours, either textured black, 3D carbon effect and brushed alloy effect, you can be sure to find a style to fit your application. Kits includes: Detail Film (12.5cm x 3m Length) Squeegee 2 x Cleaning Sachet Instruction SheetView more

E-Tech Engineering Ultra Fine Surface Detailing Filler

E-Techs Fine Surface Detailing Filler is ideal for small dents to bodywork, slight scuffs and scratches. With its Nano-Polymer technology it's easy to shape and provides a smooth finish with no air bubbles. The filler can be applied to directly affected areas and fills up to a depth of 3mm.View more