The Receptacle Plate suits the Panex Range Fasteners and is available as either clip on, requiring minimal preparation, or rivet
$1.35
The Receptacle Plate suits the Panex Range Fasteners and is available as either clip on, requiring minimal preparation, or rivet
$1.47
The zinc plated steel Panex Range Slotted Head Fastener is one of the best known quick release fastening systems in the world today. Studs have a diameter of 6mm and a slotted head. To calculate the length of stud required, add together the thicknesses of the panels being fastened, and add 7mm for the receptacle. Round up or down to the nearest mm to
$3.92
The zinc plated steel Panex Range Slotted Head Fastener is one of the best known quick release fastening systems in the world today. Studs have a diameter of 6mm and a slotted head. To calculate the length of stud required, add together the thicknesses of the panels being fastened, and add 7mm for the receptacle. Round up or down to the nearest mm to
$3.92
The zinc plated steel Panex Range Slotted Head Fastener is one of the best known quick release fastening systems in the world today. Studs have a diameter of 6mm and a slotted head. To calculate the length of stud required, add together the thicknesses of the panels being fastened, and add 7mm for the receptacle. Round up or down to the nearest mm to
$3.92
The zinc plated steel Panex Range Slotted Head Fastener is one of the best known quick release fastening systems in the world today. Studs have a diameter of 6mm and a slotted head. To calculate the length of stud required, add together the thicknesses of the panels being fastened, and add 7mm for the receptacle. Round up or down to the nearest mm to
$3.92
The zinc plated steel Panex Range Slotted Head Fastener is one of the best known quick release fastening systems in the world today. Studs have a diameter of 6mm and a slotted head. To calculate the length of stud required, add together the thicknesses of the panels being fastened, and add 7mm for the receptacle. Round up or down to the nearest mm to
$3.92
Ejecting fasteners are designed for use on curved or contoured surfaces where ejection of the fastener is essential to remove the top panel. The ejecting mechanism also gives an instant signal that the fastener is unlocked. This Dzus Fastener has a flush head and is made of zinc plated mild steel. The EHF5 has a 37mm head with 27mm between the rivet
$5.92
Ejecting fasteners are designed for use on curved or contoured surfaces where ejection of the fastener is essential to remove the top panel. The ejecting mechanism also gives an instant signal that the fastener is unlocked. This Dzus Fastener has a flush head and is made of zinc plated mild steel. The EHF5 has a 37mm head with 27mm between the rivet
$5.92
Ejecting fasteners are designed for use on curved or contoured surfaces where ejection of the fastener is essential to remove the top panel. The ejecting mechanism also gives an instant signal that the fastener is unlocked. This Dzus Fastener has a flush head and is made of zinc plated mild steel. The EHF5 has a 37mm head with 27mm between the rivet
$5.92
Ejecting fasteners are designed for use on curved or contoured surfaces where ejection of the fastener is essential to remove the top panel. The ejecting mechanism also gives an instant signal that the fastener is unlocked. This Dzus Fastener has a flush head and is made of zinc plated mild steel. The EHF5 has a 37mm head with 27mm between the rivet
$5.92
Ejecting fasteners are designed for use on curved or contoured surfaces where ejection of the fastener is essential to remove the top panel. The ejecting mechanism also gives an instant signal that the fastener is unlocked. This Dzus Fastener has a flush head and is made of zinc plated mild steel. The EHF5 has a 37mm head with 27mm between the rivet
$5.92
Ejecting fasteners are designed for use on curved or contoured surfaces where ejection of the fastener is essential to remove the top panel. The ejecting mechanism also gives an instant signal that the fastener is unlocked. This Dzus Fastener has a flush head and is made of zinc plated mild steel. The EHF5 has a 37mm head with 27mm between the rivet
$5.92
Ejecting fasteners are designed for use on curved or contoured surfaces where ejection of the fastener is essential to remove the top panel. The ejecting mechanism also gives an instant signal that the fastener is unlocked. This Dzus Fastener has a flush head and is made of zinc plated mild steel. The EHF5 has a 37mm head with 27mm between the rivet
$5.92
Ejecting fasteners are designed for use on curved or contoured surfaces where ejection of the fastener is essential to remove the top panel. The ejecting mechanism also gives an instant signal that the fastener is unlocked. This Dzus Fastener has a flush head and is made of zinc plated mild steel. The EHF5 has a 37mm head with 27mm between the rivet
$8.53
Ejecting fasteners are designed for use on curved or contoured surfaces where ejection of the fastener is essential to remove the top panel. The ejecting mechanism also gives an instant signal that the fastener is unlocked. This Dzus Fastener has a flush head and is made of zinc plated mild steel. The EHF5 has a 37mm head with 27mm between the rivet
$7.43
Ejecting fasteners are designed for use on curved or contoured surfaces where ejection of the fastener is essential to remove the top panel. The ejecting mechanism also gives an instant signal that the fastener is unlocked. This Dzus Fastener has a flush head and is made of zinc plated mild steel. The EHF5 has a 37mm head with 27mm between the rivet
$7.43
Ejecting fasteners are designed for use on curved or contoured surfaces where ejection of the fastener is essential to remove the top panel. The ejecting mechanism also gives an instant signal that the fastener is unlocked. This Dzus Fastener has a flush head and is made of zinc plated mild steel. The EHF5 has a 37mm head with 27mm between the rivet
$6.72
Ejecting fasteners are designed for use on curved or contoured surfaces where ejection of the fastener is essential to remove the top panel. The ejecting mechanism also gives an instant signal that the fastener is unlocked. This Dzus Fastener has a flush head and is made of zinc plated mild steel. The EHF5 has a 37mm head with 27mm between the rivet
$6.72
The Dzus Fastener Attachment Spring is designed for use with the Dzus Fastener. The S5 Spring suits the EHF5 type Dzus Fastener.The S6 Spring suits the EHF6 type Dzus Fastener. To calculate the correct pairing of fastener and spring us the following formula: Add together the thicknesses of both panels to be fastened and the spring clearance. Subtract
$1.28
