Design Engineering

Current Filters
Design Engineering

Design Engineering Titanium Protect A Boot – Pack Of 2, Brown

Titanium Protect A boots offer the latest in thermal protection technology for spark plug boots and wires. Manufactured from woven, stranded lava rock. Titanium Protect A Boots can withstand temperatures up to 1800 deg F (982 deg C) and are resistant to abrasion, chemicals and other contaminants. They are a universal fit and are suitable for most straight

Design Engineering Titanium Protect A Boot – Pack Of 8, Black

Titanium Protect A boots offer the latest in thermal protection technology for spark plug boots and wires. Manufactured from woven, stranded lava rock. Titanium Protect A Boots can withstand temperatures up to 1800 deg F (982 deg C) and are resistant to abrasion, chemicals and other contaminants. They are a universal fit and are suitable for most straight

Design Engineering Titanium Turbo Shield – T22 Turbo – Kit

The Design Engineering Titanium Turbo Shield features a multi-layer construction for extreme heat protection. The Titanium Turbo Shield is made from pulverised volcanic rock which is then strained and then integrated into a wrap type material. The turbo shields can withstand extremely high temperatures up to 900C direct and 1300C radiant which benefits the

Design Engineering Ultra Sheath MA Heat Sleeve – 1/2" Diameter 15ft Long

Design Engineering Ultra Sheath MA is designed to provide the ultimate protection against heat for hoses, wires or cables. Ultra Sheath MA is constructed using a process which impregnates molten aluminium into the core fabric which allows it to withstand sustained direct heat up to 593 degrees C (1100 deg F). Easily fitted by sliding over the hose or cable

Design Engineering Spark Plug Lead Heat Shrink Boot 12mm Dia x 1.5" Long Pack of 25 In Grey

These heat resistant heat shrink tubes from Design Engineering are ideal for sealing spark plug leads to boots to form a protective seal. The 1 1/2″ long tubes have a shrink ratio of 3:1 and can easily be installed using a heat gun.Available in 12mm or 18mm diameters 1 1/2″ long, Each pack contains 25 heat shrink

Design Engineering Spark Plug Lead Heat Shrink Boot 12mm Dia x 1.5" Long Pack of 25 In Red

These heat resistant heat shrink tubes from Design Engineering are ideal for sealing spark plug leads to boots to form a protective seal. The 1 1/2″ long tubes have a shrink ratio of 3:1 and can easily be installed using a heat gun.Available in 12mm or 18mm diameters 1 1/2″ long, Each pack contains 25 heat shrink

Design Engineering Spark Plug Lead Heat Shrink Boot 18mm Dia x 1.5" Long Pack of 25 In Black

These heat resistant heat shrink tubes from Design Engineering are ideal for sealing spark plug leads to boots to form a protective seal. The 1 1/2″ long tubes have a shrink ratio of 3:1 and can easily be installed using a heat gun.Available in 12mm or 18mm diameters 1 1/2″ long, Each pack contains 25 heat shrink

Design Engineering Spark Plug Lead Heat Shrink Boot 18mm Dia x 1.5" Long Pack of 25 In Blue

These heat resistant heat shrink tubes from Design Engineering are ideal for sealing spark plug leads to boots to form a protective seal. The 1 1/2″ long tubes have a shrink ratio of 3:1 and can easily be installed using a heat gun.Available in 12mm or 18mm diameters 1 1/2″ long, Each pack contains 25 heat shrink

Design Engineering Spark Plug Lead Heat Shrink Boot 18mm Dia x 1.5" Long Pack of 25 In Grey

These heat resistant heat shrink tubes from Design Engineering are ideal for sealing spark plug leads to boots to form a protective seal. The 1 1/2″ long tubes have a shrink ratio of 3:1 and can easily be installed using a heat gun.Available in 12mm or 18mm diameters 1 1/2″ long, Each pack contains 25 heat shrink

Design Engineering Spark Plug Lead Heat Shrink Boot 18mm Dia x 1.5" Long Pack of 25 In Red

These heat resistant heat shrink tubes from Design Engineering are ideal for sealing spark plug leads to boots to form a protective seal. The 1 1/2″ long tubes have a shrink ratio of 3:1 and can easily be installed using a heat gun.Available in 12mm or 18mm diameters 1 1/2″ long, Each pack contains 25 heat shrink

Design Engineering Speed Sleeves – 4/6 Cylinder Engine Types

The Design engineering Speed Sleeves provide, as the name suggests a rapid alternative to exhaust header coverage. The Kits have been developed to fit over exhaust tubing up to 2.25″ in diameter and are ideal for situations where troubleshooting particular header areas or allowing components close to the head to be shielded quickly. On occasion

Design Engineering Speed Sleeves – 8 Cylinder Engine Types

The Design engineering Speed Sleeves provide, as the name suggests a rapid alternative to exhaust header coverage. The Kits have been developed to fit over exhaust tubing up to 2.25″ in diameter and are ideal for situations where troubleshooting particular header areas or allowing components close to the head to be shielded quickly. On occasion

Design Engineering Spark Plug Lead Heat Shrink Boot 12mm Dia x 1.5" Long Pack of 25 In Black

These heat resistant heat shrink tubes from Design Engineering are ideal for sealing spark plug leads to boots to form a protective seal. The 1 1/2″ long tubes have a shrink ratio of 3:1 and can easily be installed using a heat gun.Available in 12mm or 18mm diameters 1 1/2″ long, Each pack contains 25 heat shrink

Design Engineering Spark Plug Lead Heat Shrink Boot 12mm Dia x 1.5" Long Pack of 25 In Blue

These heat resistant heat shrink tubes from Design Engineering are ideal for sealing spark plug leads to boots to form a protective seal. The 1 1/2″ long tubes have a shrink ratio of 3:1 and can easily be installed using a heat gun.Available in 12mm or 18mm diameters 1 1/2″ long, Each pack contains 25 heat shrink

Design Engineering Protect A Wire – 2 Pack – Blue

The Design Engineering Protect-A-Wire protects your Spark plug leads from the extreme heat generated by the headers or exhaust manifolds. Constructed from a Fibreglass composite material, they install in seconds and come in vivid colours. They prevent damaging heat that can cause misfiring. If the ignition leads are very close to the headers, it is still

Design Engineering Protect A Wire – 2 Pack – Red

The Design Engineering Protect-A-Wire protects your Spark plug leads from the extreme heat generated by the headers or exhaust manifolds. Constructed from a Fibreglass composite material, they install in seconds and come in vivid colours. They prevent damaging heat that can cause misfiring. If the ignition leads are very close to the headers, it is still

Design Engineering Protect A Wire – 2 Pack – Silver

The Design Engineering Protect-A-Wire protects your Spark plug leads from the extreme heat generated by the headers or exhaust manifolds. Constructed from a Fibreglass composite material, they install in seconds and come in vivid colours. They prevent damaging heat that can cause misfiring. If the ignition leads are very close to the headers, it is still

Design Engineering Protect A Wire – 8 Pack – Black

The Design Engineering Protect-A-Wire protects your Spark plug leads from the extreme heat generated by the headers or exhaust manifolds. Constructed from a Fibreglass composite material, they install in seconds and come in vivid colours. They prevent damaging heat that can cause misfiring. If the ignition leads are very close to the headers, it is still

Design Engineering Protect A Wire – 8 Pack – Blue

The Design Engineering Protect-A-Wire protects your Spark plug leads from the extreme heat generated by the headers or exhaust manifolds. Constructed from a Fibreglass composite material, they install in seconds and come in vivid colours. They prevent damaging heat that can cause misfiring. If the ignition leads are very close to the headers, it is still

Design Engineering Protect A Wire – 8 Pack – Red

The Design Engineering Protect-A-Wire protects your Spark plug leads from the extreme heat generated by the headers or exhaust manifolds. Constructed from a Fibreglass composite material, they install in seconds and come in vivid colours. They prevent damaging heat that can cause misfiring. If the ignition leads are very close to the headers, it is still