AEM

Showing Products 1 - 6 out of total 6

View
Filters: AEM

AEM Air Filter Intake System – Cold Air Intake with Air Scoop

AEM Intake Systems are a range of air filters that have been designed to increase power and torque, look smart, and offer superb intake sound. AEM filters, connections, parts and accessories have been designed, tuned and dyno-tested for each specific car, offering the best possible performance air filter solution.Most AEM Intake Systems feature an oversized AEM Dryflow synthetic washable air filter for the best airflow, whilst still offering the highest filtration. This gives unbeatable performance, and still allows easy, oil-free cleaning.AEM filter intakes generally use mandrel-bent aluminium connecting tubes, powder coated heat shields, and high quality fittings designed to reduce restriction and reduce intake temperature.Depending on the application, AEM Intake Systems are available in different models of kits.View more

AEM Electronics High Flow Fuel Filter

The AEM universal high flow -10 AN inline filter is specifically engineered for maximizing flow without sacrificing filtration. The end caps have a -10AN female fitting which allows the filter to flow up to 12.32 gpm at 45 PSI and 2.63 gpm at 6 PSI. The grooves on the end of the machined o ring receiver cap ensure that leaks cannot happen, all the dealing o rings and gaskets are made of Viton which has outstand perfromance when used with gasoline, alcohol or gasoline/alcohol blended fuels. This filter is able to filter particles as small as 7 microns. As the filter has a 2 inch outer diamter it can easily be mounted virtually anywhere in the vehicle for ease of access.View more

AEM Electronics Universal Adjustable Fuel Pressure Regulator

The AEM universal adjustable fuel pressure regulator is capable of supporting enough fuel flow for engines up to 1000 bhp. The patented interchangable discharge ports allow the regulators output to match the output of any fuel pump. The fuel pressure regulator is tapped to be able to accept -6AN or 9/16"x18 fittings and has a 1/8 NPT port for a fuel pressure gauge or pressure sensor pick up. The regularot is adjustable from 20 psi to maximum fuel pump capacity.View more

AEM Electronics Water/Methanol Injection Kit

The AEM Water/Methanol Injection System is suitable for both turbo and supercharged vehicles. The advantages of this kit are it allows you to increase boost pressure and advance timing without having to run higher octane fuel, these kits are also effective for reducing engine inlet air temperatures and suppressing harmful detonation. Using this water/methanol kit can increase power by up to 20%.This water/methanol controller is designed for petrol vehicles only with a maximum boost of 35psi, and comes with an on board MAP sensor with a molded in nipple for a boost hose pickup. The kit is also supplied with a fluid level sensor so it can detect if the fluid in the system is getting low or has an error.Once the system is installed adjustments can be made to control the amount of water/methanol mixture that is fed into the inlet stream from the reservoir via the 3 included jets, this can result in significant horsepower gains.This kit includes:Water/Methanol Injection KitStandard ControllerInternal MAP with 35psi max200psi WM Pump1 Gallon ReservoirConductive Fluid Level SensorInstallation InstructionsView more

AEM Electronics Water/Methanol Injection Kit Multi Input Controller

The AEM water/methanol injection system is a proven means to effectively reduce engine inlet air temperature and suppress harmful detonation on high compression naturally aspirated engines. This allows the boost to be increased reliably and advance ignition timing without the need for high octane fuel. The system uses the most robust hardware combined with more advanced features than any other comparable water/methanol system. The multi input controller allows users to install this kit on high compression naturally aspirated vehicles via the MAF/IDC settings. The multi input controller works with an external 0-5v voltage based MAP sensor, a frequency based input for IDC, frequency based MAF or a 0-5v voltage based MAF. The input controller is designed fore vehicles with a maximum boost of 35psi and comes with an on board MAP sensor with a molded nipple for boost hose pick up. The system also comes with a fluid level sensor so can alter you when the level is getting low or has an error. Once you have installed the system adjustments can be made to control the amount of water/methanol mixture that is fed into the inlet stream from the reservior via 3 jets this can give you significant horsepower...View more

AEM Electronics Water/Methanol Injection Kit With Multi Input Controller

The AEM Water/Methanol Injection System is suitable for both forced induction and normally aspirated vehicles. The advantages of this kit are it allows you to increase boost pressure and advance timing without having to run higher octane fuel, these kits are also effective for reducing engine inlet air temperatures and suppressing harmful detonation. Using this water/methanol kit can increase power by up to 20% on forced induction engines.This kit includes a multiple input  controller that allows users to install the kit on ultra high boost vehicles over 35PSI using a 0-5v voltage based external MAP sensor.The controller also works with input from injector duty cycle, frequency based MAF or 0.5v voltaged based MAF. This makes it suitable for use on high compression NA engines.The kit is also supplied with a fluid level sensor so it can detect if the fluid in the system is getting low or has an error.Once the system is installed adjustments can be made to control the amount of water/methanol mixture that is fed into the inlet stream from the reservoir via the 3 included jets, this can result in significant horsepower gains.This kit includes:Multi-Input controllerWiring harnessBoost Safe failsafe output includedHeavy-duty high-pressure injection pump features integral fittings,...View more